Green Bast 4Runner 7MG-TE SAS build
#65
Registered User
Thread Starter
Join Date: Oct 2009
Location: sask
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
#67
Registered User
Thread Starter
Join Date: Oct 2009
Location: sask
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Ah yes boost. As of right now I'm just at the stock 6psi I haven't done the boost controller yet, that will wait till it warms up a bit. We hit -40 the other night and the garage is unheated so any wrenching I do has to be vital to the build haha
#72
Registered User
Thread Starter
Join Date: Oct 2009
Location: sask
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
for hood pins I added them to my SAS and gear order from Low Range Offroad. one of the pins decided to loosen off and go out into the world on its own, i'll have to track down a new one.
I found the stock gears to be good for now so if anyone is interested in a set of 5.29's let me know
#73
Thanks! for the wiring I used the site supracharged.com. Also there is a guy http://spoolymcbooster.com/ he has some youtube vids on how to wire it as well as write ups. I find the way he talks and writes to be hilarious so I highly recommend checking his stuff out if you are interested in doing the swap, both informative and funny.
for hood pins I added them to my SAS and gear order from Low Range Offroad. one of the pins decided to loosen off and go out into the world on its own, i'll have to track down a new one.
I found the stock gears to be good for now so if anyone is interested in a set of 5.29's let me know
for hood pins I added them to my SAS and gear order from Low Range Offroad. one of the pins decided to loosen off and go out into the world on its own, i'll have to track down a new one.
I found the stock gears to be good for now so if anyone is interested in a set of 5.29's let me know
#75
Registered User
Thread Starter
Join Date: Oct 2009
Location: sask
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
#76
Registered User
Join Date: Jan 2015
Location: North Carolina
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
prob a dumb question but im gonna swap my enigne andi was gonna do a 3rz but someone told me to go for 7mge. could i still have 4x4 if i decide the 7M-GTE
Last edited by RedRockWarrior; 02-23-2015 at 06:22 AM.
#77
Registered User