Jzoomers 84 5spd long bed build thread (caution slow progress ahead)
I have already begun part of my project I have almost completed the tear down at this point all I have left is to undo the cab mounts and lift the cab off of the frame so I can start grinding
Here she is the day I brought her home a running and driving 84' 5spd 4x4 lwb truck. Picked her up for $700 which is a good score around here in this shape especially with a 90% rust free frame! https://cimg9.ibsrv.net/gimg/www.yot...dfdc9e1fcd.jpg I had her on jack stands for rear break work and that's when I looked her over and decided I like this one and really want to make her last so a complete rebuild was in order.. My Internet is being stupid so I'll post the teardown photos soon |
https://cimg2.ibsrv.net/gimg/www.yot...5da7625105.jpg
After I pulled the motor and front end off https://cimg1.ibsrv.net/gimg/www.yot...53927303de.jpgAfter i removed the dash and cut the rust out of the floor pans https://cimg8.ibsrv.net/gimg/www.yot...b36661f277.jpgBed removal required a few cutoff wheels and a 2 sawzall blades but she finally gave in https://cimg9.ibsrv.net/gimg/www.yot...1a9fe8e0ca.jpgThis is my current parts cache, ive got alot of work ahead of me |
Finally got the cab all disconnected, I didn't have any help to take the cab off but I did manage to get it to the very back of the frame all on my own, let's just say it wasn't fun or easy but it's got it out of the way enough so I can start removing things from the front end of the frame and get ready for pressure washing before grinding it down to bare metal, for a fresh undercoating :-)https://cimg3.ibsrv.net/gimg/www.yot...141d674508.jpg
|
Does anyone have any recommendations on a chemical product to remove old ancient undercoating from the frame? It just melts and smears when I attempted to grind an area
|
I'm going to say after work to pick up an oscillating tool from hft. I have heard good things about it being able to remove the undercoating, hopefully it goes well, having to work 80+ hrs a week really takes time away from the build. But eventually will mean more newer and better parts hopefully
|
Looks like your making some good progress, keep up the good work!
|
https://cimg8.ibsrv.net/gimg/www.yot...a67df603b8.jpgBefore trying put the oscillating scraper tool
https://cimg3.ibsrv.net/gimg/www.yot...7810f0916a.jpg https://cimg4.ibsrv.net/gimg/www.yot...c3d98f5b8e.jpg https://cimg5.ibsrv.net/gimg/www.yot...7ac93cf907.jpgNotice the big piles of material on the ground that came off the frame, that tool removed 80-90% of the undercoating! HfT ftw |
https://cimg2.ibsrv.net/gimg/www.yot...b3a655ba3f.jpgGot the cab fully removed finally
https://cimg6.ibsrv.net/gimg/www.yot...2a437a7382.jpgGot the cab in its temporary resting place on the back patio so its out of the weather https://cimg4.ibsrv.net/gimg/www.yot...7ef2a0c0c9.jpgPulled the frame out to pressure wash with only 1/2 success, my prrssure washer was surging constantly and kept cutting out and would only get about 1/2 of its max pressure |
All times are GMT -8. The time now is 10:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands