broskyo's 1985 4Runner Build-Up Thread
 

My 87 4runner that I was planning on SAS has been totaled since the accident:(. I picked up this 85 after a couple of weeks with no wheels...its a 5 speed 230 thousand miles with a new longblock about 35k ago. All original pretty clean other than the dog hair that was in the back seat when I got it. What I'm shooting for is a fairly low lift no bigger than 4in, not sure if I wanna run 33's or 35's. I'm gonna gear it with 4.88's most likely locked front and rear. also planning on making a rear bumper and maybe front bumper and a front square D-shaft. I'm using trail gear stuff in the front springs, shackles, u-bolts, hysteer once I get a steering box and chevies in the rear.
The morning I got it
http://i209.photobucket.com/albums/b...o/IMG00234.jpg
Put the front lift on and it was higher than I pictured it so I pulled a leaf and shortened the shackles a bit. Which helped with pinion angle because I'm not putting a front hanger on it. Didn't take any pictures of the process or what it look like before I lowered because it was raining and I just wanted to finish putting it all on and then it was dark.
Here is how it sits today(I'm going to cut the extra off the shackles later once everything is on)
http://i209.photobucket.com/albums/b...o/IMG00238.jpg

85 nice year!

Friggin score! Grats

Went out and grabbed some chevy leafs today I went with the 4x4 ones I figure I can always just a pull a leaf if I need to. I also got started on making the shackles for the rear. I'm gonna make them 6in eye to eye just like the ones in the sky kit and I can always shorten them. Now I'm just waiting for my shipment from sky for the spring and shackle hangers.
springs
http://i209.photobucket.com/albums/b...o/IMG00241.jpg
shackles and bolts
http://i209.photobucket.com/albums/b...o/IMG00243.jpg

I got my shipment from sky, finished up the shackles, and took the overload springs of the 63's. now I'm just waiting for sometime to weld all the brackets on and everything.
http://i209.photobucket.com/albums/b...o/IMG00249.jpg

Today I cleaned up the frame for welding the spring brackets, and then it started to get frustrating...I decided to work on the wiring problem when the trucks running and I turn on the lights I blow the taillight fuse and the whole truck shuts off, and now my rear window doesn't work. I installed a stereo and then this began to happened but it may have happened once before I installed it I not sure. So I completely disconnect the stereo and it didn't help there was also a 25amp fuse in the taillight slot and it is supposed to be a 15amp. There was also an old trailer light hook-up that I disconnect and still no difference.

you got somekind of open short out somewhere look for broken and or open wires touching metal...

I bought some 35x12.50x15 bfg mt 2 have about 65% and other 2 have about 80%, I got them off craigslist for a deal:banger:. I also got the spring hangers tacked now I'm just waiting for time to finish welding and swap in the 63's.
http://i209.photobucket.com/albums/b...o/IMG00252.jpg

Got the 63's in, all I got were some random pictures before it got dark. I also picked up some rims for the 35's. Still need to order a rear brake line, weld front and rear shock tower, rear flip kit, hysteer with IFS box and much more but atleast its sitting even now.
http://i209.photobucket.com/albums/b...o/IMG00254.jpg
http://i209.photobucket.com/albums/b...o/IMG00255.jpg
my buddy was doing the welding
http://i209.photobucket.com/albums/b...o/IMG00258.jpg
how it sits now
http://i209.photobucket.com/albums/b...o/IMG00259.jpg
http://i209.photobucket.com/albums/b...o/IMG00260.jpg

What's with the reflective decals?

haha I'm not sure, thats how it was when I bought it. I'm thinking I'll take them off but I don't know how the paint is gonna be under there.

Put my tires and rims on and took some driveway shots today.
http://i209.photobucket.com/albums/b...o/IMG00270.jpg
http://i209.photobucket.com/albums/b...o/IMG00279.jpg
http://i209.photobucket.com/albums/b...o/IMG00277.jpg
http://i209.photobucket.com/albums/b...o/IMG00281.jpg

It's been awhile. I got my shocks and hysteer on and just finished my front drive shaft.

http://i209.photobucket.com/albums/b...kyo/photo2.jpg

http://i209.photobucket.com/albums/b...kyo/photo3.jpg

http://i209.photobucket.com/albums/b...kyo/photo4.jpg

http://i209.photobucket.com/albums/b...kyo/photo5.jpg

http://i209.photobucket.com/albums/b...skyo/photo.jpg

Looks great! Any plans for a paintjob?

You need to raise the bar that comes off the load sensing proportioning valve, its to low the way you have it now, so you will have very little to no rear brakes.

Nice, I love the Craig's List/ Junk yard/ homemade builds. You could have easily made those 63" spring hangers yourself, though. Is that an EFI or carbureted 85?

Looks like an EFI. :hillbill:

Fink:devil:

You may want to take your welder and make a new articulation ramp. :D

Other than that nice runner!!

Looking good. How is your body roll in the rear? Is it squirrely on corners? Looks nice and flexy.

http://i209.photobucket.com/albums/b...kyo/photo3.jpg
your angle on your steering box looks a bit too flat.
just how much clearance do your tie rods have when the driver side spring is at full flex? I bet it is pretty dang close to rubbing on the spring.
-might consider a flat pitman arm

I plan to do one eventually thats about it. haha

Its not to bad I'm happy with the way it feels. It can be a little squirrley at times but once everything is dialed in it should be better.

Haven't updated recently but I have made sliders, rear bumper, front diff armor and started on a front winch bumper...now time for some pics

http://i209.photobucket.com/albums/b...yo/photo-4.jpg
http://i209.photobucket.com/albums/b...yo/photo-5.jpg
http://i209.photobucket.com/albums/b...yo/photo-3.jpg
http://i209.photobucket.com/albums/b...yo/photo-2.jpg
http://i209.photobucket.com/albums/b...yo/photo-1.jpg

Ok so the 4runner has been have trouble idling after its been run for about 30 seconds to a minute when its cold, and it wont idle at all when its warm. It also just starting bucking a couple days ago. I checked a the vacuum line they were all good so I check where then go into the throttle body and they were plugged with black gunk. After that I took the throttle body off and cleaned all the clogged parts and the rest, but there was a really thick layer of the black gunk in the whole body so I just made sure all the ports were cleared out and the put it all back together and now it wont run at all. If I can get it to start I have the keep the revs high or it will start backfiring or missing and die. I put all the vacuum lines back on and I'm almost positive there all in the right place.:bang:

So any ideas????

:bump: Any ideas??

The 4runner is still not running I've done the tps and afm tests on 4crawler. I was wondering if anyone knows if the AFM is supposed to make a loud ticking noise(like the air flow gate is opening and closing really fast) when the motor is cranking and almost firing up?

I just took my front axle apart to put my 5.29 third in and I got everything put back together but the axle inst sticking out enough to get the snap ring on.

sometimes it gets pushed in a little bit, you should be able to pull it out enough to get the ring on, if you cant pull it out enough then you put it back together wrong.