Inner tie rod issues
#1
Inner tie rod issues
I have a 2010 4Runner Trial with KDDS and a 3 inch lift. I have alignment problems. I took it to an off road shop and was told that I needed to replace the bushings, upper ball joints and inner/outer tie rods (all of which I knew). I was told that the inner tie rods are not serviceable which means replacement of the entire rack and pinion assembly and in turn requires the removal of the engine and transmission to access the steering gear. Any information would be greatly appreciated.
Thanks
Chris
Thanks
Chris
Thread
Thread Starter
Forum
Replies
Last Post
bflooks
95.5-2004 Tacomas & 96-2002 4Runners
0
03-15-2006 12:59 PM
Crux
Maintenance & Repair Archives
9
06-08-2005 12:47 PM
Localmotion
95.5-2004 Tacomas & 96-2002 4Runners
4
11-27-2004 05:02 PM