First and second gen pickup blow out sale!
03-12-2017, 05:45 PM
#81
I didn't read the whole thread, but if you're willing to transport the trucks, I might be interested in as much as you can haul in one load. I'm located mid state Michigan, Midland would be close enough for shipping estimates. Bodies rust apart up here, so dinged up people don't care about, it's the rust that's the real killer. Just entertaining ideas atm, but if I did get them, 90%+ of the parts would get used or resold. I really need to get a 30ft trailer made so I can haul 2 trucks at once and stuff them with parts lol.
03-15-2017, 03:12 PM
#84
Registered User
Thread Starter
iTrader: (2)
Join Date: Jul 2013
Location: Atkins, AR
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lylerich
ok sounds good Im pretty sure that they should have the same tail gate. I have been looking everywhere online and I haven't had any luck. My truck sat for 6 years with a buch of pine straw in it and well it did a pretty good number on the bed. Thankfully the sides of the bed didn't get much rust. The tailgate, bed, and one of the bottom side panels on the bed took the most damage.
03-15-2017, 03:13 PM
#85
Registered User
Thread Starter
iTrader: (2)
Join Date: Jul 2013
Location: Atkins, AR
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by OBXPaul
Do you have a bed that will fit an '83 4x4? Have tailgate, bed and sides have lots of rust and have been looking with no luck. Thanks
04-04-2017, 02:01 PM
#91
Registered User
Thread Starter
iTrader: (2)
Join Date: Jul 2013
Location: Atkins, AR
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by farrier
Looking for a AC tensioner pulley and bracket.
Mine tightens with the smog pump, which I'm removing.
Mine tightens with the smog pump, which I'm removing.
04-08-2017, 10:11 AM
#93
Let me know if you have any of the following for a 79-83.
-22r intake hose that attaches to the air cleaner and body on the drivers side.
-brush guard for 1st gen pickup
-tan door panels in good condition (prefer delux interior)
-floor pan cuts
-Drivers rear mud flap (toyota) 4wd
-Rubber between frame and bed on passenger side
-OEM radio for 1st gen
-Other vintage offroad goodies
Im in McPherson KS, but may be willing to drive to you.
-22r intake hose that attaches to the air cleaner and body on the drivers side.
-brush guard for 1st gen pickup
-tan door panels in good condition (prefer delux interior)
-floor pan cuts
-Drivers rear mud flap (toyota) 4wd
-Rubber between frame and bed on passenger side
-OEM radio for 1st gen
-Other vintage offroad goodies
Im in McPherson KS, but may be willing to drive to you.
Last edited by chughes96; 04-09-2017 at 06:33 PM.
04-10-2017, 09:31 AM
#95
Registered User
Thread Starter
iTrader: (2)
Join Date: Jul 2013
Location: Atkins, AR
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by chughes96
Let me know if you have any of the following for a 79-83.
-22r intake hose that attaches to the air cleaner and body on the drivers side.
-brush guard for 1st gen pickup
-tan door panels in good condition (prefer delux interior)
-floor pan cuts
-Drivers rear mud flap (toyota) 4wd
-Rubber between frame and bed on passenger side
-OEM radio for 1st gen
-Other vintage offroad goodies
Im in McPherson KS, but may be willing to drive to you.
-22r intake hose that attaches to the air cleaner and body on the drivers side.
-brush guard for 1st gen pickup
-tan door panels in good condition (prefer delux interior)
-floor pan cuts
-Drivers rear mud flap (toyota) 4wd
-Rubber between frame and bed on passenger side
-OEM radio for 1st gen
-Other vintage offroad goodies
Im in McPherson KS, but may be willing to drive to you.
04-15-2017, 04:48 PM
#98
Registered User
Join Date: Feb 2016
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Door panels and trim any good off of that 84 or 87?
i need two passenger and one driver.
and that chrome 4x4 grill
and the little plastic bed trim in front of the rear wheels.
and the "Toyota 4x4" cab emblems. I lost one
might like that brown dash pad too if you make a nice package deal
thanks bud
i need two passenger and one driver.
and that chrome 4x4 grill
and the little plastic bed trim in front of the rear wheels.
and the "Toyota 4x4" cab emblems. I lost one
might like that brown dash pad too if you make a nice package deal
thanks bud
04-21-2017, 05:42 PM
#99
Registered User
Thread Starter
iTrader: (2)
Join Date: Jul 2013
Location: Atkins, AR
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tmkllr
Door panels and trim any good off of that 84 or 87?
i need two passenger and one driver.
and that chrome 4x4 grill
and the little plastic bed trim in front of the rear wheels.
and the "Toyota 4x4" cab emblems. I lost one
might like that brown dash pad too if you make a nice package deal
thanks bud
i need two passenger and one driver.
and that chrome 4x4 grill
and the little plastic bed trim in front of the rear wheels.
and the "Toyota 4x4" cab emblems. I lost one
might like that brown dash pad too if you make a nice package deal
thanks bud
