92 Toyota 2wd parts for sale - Iowa
 

I recently bought a 92 Toyota 2wd for body panels for my 4x4. This truck is about as rust free as they get as in it doesn't have any.:banger: The entire front suspension, front fenders, basically anything firewall forward and cab is up for grabs. I will be making the frame and bed into a custom trailer, Basically I am keeping the doors, door panels, bed and rear part of frame. The dash is not cracked, it has a full bench, I also have a 60/40 bench as well, carpet is in good shape. still has all the steering items in place, headliner looks good as well and all the other trim is there. it has a slider rear window. Windshield is crack free.

http://www.mazdabscene.com/photos/image-p14527.JPG
http://www.mazdabscene.com/photos/image-p14528.JPG
http://www.mazdabscene.com/photos/image-p14529.JPG


Just shout me a pm for info. Not looking to make much money and will charge actual shipping. It might take me a day or two to ship depending on the weather it is stored outside. So if its raining or super cold I won't be able to get to it right away.

And if the price is right a would sell the rear axle as well.

What size engine does it have? Looking for a cheap 3vz for a rebuild.

no engine, trans or radiator. Must off forgotten to put that in the info woops.:bang:

No need to bang your head
 

LOL thanks for responding anyway.

Do those corner lights fit 4wd? They always specify 2wd or 4x4 on ebay but they look about the same. If so how much for those?

2wd fenders and marker lights are different. If you use 2wd fenders you have to use 2wd markers and vise versa. Thou 2wd fenders will bolt to 4wd bodies with no problems.

Does it still have all the wiring in the dash? I mostly just need the two plugs that plug into the wiring harness right next to the ecu

Oh yeah guess i shoulda putb2 and 2 together there. Do you have the plastic that goes around the steering column? And if so what color?

The wiring under the dash is complete. The lower dash trim and around the column is already sold.

How much would you want for those two plugs with 10 or so inches of wires hanging off?

$15 with shipping sound too much or just right. not real good at pricing small stuff.

That sounds about right. Would you be able to take a picture first I just want to make sure they are the right ones. It's a 92 2wheel drive with a 22re right?

yes to all. I'll try to get a pic after work Friday.

That would be great. Thank you very much.

Seat and wiring pics
60/40 seat
http://www.mazdabscene.com/photos/image-p14584.JPG
http://www.mazdabscene.com/photos/image-p14585.JPG

full bench
http://www.mazdabscene.com/photos/image-p14586.JPG

wiring
http://www.mazdabscene.com/photos/image-p14580.JPG
http://www.mazdabscene.com/photos/image-p14581.JPG
http://www.mazdabscene.com/photos/image-p14582.JPG
http://www.mazdabscene.com/photos/image-p14583.JPG

So the wires ill need should be behind or beside that ecu and plug into two plugs that come off the wiring harness ill take a picture when i get home of the two on the end of my wiring harness and ill just need the female side of the plugs

Sorry it's taken so long to get that picture. Just got busy. I wasn't able to figure out how to post one on here with my phone but I did put a couple in my album if you want to just look at that

ok I will have a look tonight to see if the plugs are not fried. You need the ones that plug into the ecu right?

No sorry its kind of hard to explain. so if you take the wiring harness out of the truck and have it laying on a table, it should start with four plugs and then go through the firewall to all the differnt plugs on your motor. the four plugs that are at the start of the wiring harness are inside the dash they are what im looking at. two of them plug into the ecu and two plug into plugs coming from the dash harness next to the ecu. and i need the two that plug into the dash plugs not the ecu. they should be being the ecu. However I don't need the ones off the motor harness I need the ones they plug into that go into the dash harness (i need female ends) which should be inside the dash ill take another picture of an old harness and point to the two I'm talking about if that helps

ok you need the body to engine harness female plugs. that are behind the ecu in the kick panel correct??