1994 4 Runner
 

I'm parting out my 1994 4 Runner. The truck is black and I've been parting it out for awhile now. Some really good parts are still available, just let me know what you're looking for and I will check to see if it's still available. As far as the glass goes, the front windshield is good but I'm not going to take it out, the rest of the doors and the driver side quarter glass are all good. Engine parts have been picked on so just let me know what you need. I might need of pic of the part you need so I can relate.
It's already missing the following:
Both front fenders
driver side front door
rear bumper
passenger side quarter window
tail gate
Thanks
Mike
Hump
https://cimg8.ibsrv.net/gimg/www.yot...c5c548ebae.jpg
https://cimg1.ibsrv.net/gimg/www.yot...226f8f538b.jpg
https://cimg4.ibsrv.net/gimg/www.yot...ac18dcfbce.jpg
https://cimg6.ibsrv.net/gimg/www.yot...132e9f923a.jpg

I am in need of the brake fluid level sensor plug from the wiring harness. I have a 95 master cylinder but not the right connector to plug into it.

Are you talking about the wires and plug that goes to the master cylinder cover inside the engine compartment?

do you have the abs/power steering actuator? on the 94 4runner.

Xim
I am i no way an expert on these trucks and there part names. Can you send me a picture of the part you need and where it is located on the truck. That's the only way I would know where to look to see if I have it The dimensions would help too, if it's 2" big or 7" big
Hump

Hey, if you wouldn't mind, could you take a few pictures for me? I'm installing AC in my truck, and would like to see how the condenser (in front of the radiator) is mounted on a 4Runner. Thanks!

Yes I need the wires and plug that plig into the side of the master cylinder.
https://cimg8.ibsrv.net/gimg/www.yot...ea544ab492.jpg
I need the plug that plugs into this port, if you could cut it so there is about 6in of wire left attached to the plug that would be ideal.

https://cimg3.ibsrv.net/gimg/www.yot...2f2160cd85.jpg
https://cimg8.ibsrv.net/gimg/www.yot...c83a702007.jpg

its on the passenger side in the front, right under the battery

Yes, I have it
https://cimg6.ibsrv.net/gimg/www.yot...6b526b78c4.jpg
https://cimg7.ibsrv.net/gimg/www.yot...57a00be037.jpg

Apparently you don't need it
Thanks for wasting my time!
Hump

Sorry, nothing there

This is all that is left on the front of the truck, hope it helps
https://cimg5.ibsrv.net/gimg/www.yot...d5e5b57c5f.jpg
https://cimg0.ibsrv.net/gimg/www.yot...d0d4aea472.jpg

Yes, incredibly helpful! Thank you!

Glad to help
Let me know if there are any parts in the pic that you need. I also have some parts off the 92 AC unit that I took off that might be of interest.
Hump

I had sent you a PM a while back. Never heard from you.

What part of PacSoutwest? If it’s driving distance from San Diego, I’d like to get the masterbrake cylinder, two front calipers, and the two front seat of its in good condition.

Tom,
Isn't everywhere with in driving distance from San Diego? Kidding..............I'm about 600 miles, get on the 15 and go for ever........probably to far to go for a few parts
I'm located in Enoch, or Cedar city, Utah
Hump

Lol, of course it was in the name. PM’d you

Do you have the center console switch plate for the back window, lock and wiper? Send pictures, please.

Thanks,

Sorry, the console was sold with all the switches in it
Hump