GreenFlames

i need new tires, im looking at the BFG all terrains (33's) either in the 9.5 or 10.5 range, has anybody tired either of these widths out? i have heard that the 9.5's have some bead issues. any insight??

bobby_duce

read this, good info.

http://www.4crawler.com/4x4/BFG_AT_KO.shtml

scuba

10.5s. The 9.5s are just too small IMHO and look goofy on a big truck like a yota.

bobby_duce

^^^ i would have to agree, i have 30x9.5 tires and i wouldnt want to go any bigger than 30" with that width. not to mention than a 9.5 are harder to find. people run 33x10.5's and it seems to work well.

scuba

I wheeled a few of the harder trails out here in SoCal on old, bald, 33X10.5 KM1's.
They work just fine on most stuff.

I only stepped up to a 12.5 because noone makes a radial skinny 35. And don't say interco does. I know that. But they are undersized and I didn't need that aggressive of a tread.

MaK92-4RnR

i DD and wheel Km2s. they're great ( except the edges chip/chunk off easily ) I honestly wish GY would make a 33x10.50 MTR kevlar :/

GreenFlames

Alrighty then, guess I will order me up some 33x10.5's