91 pickup Cummins R2.8 swap
02-18-2018, 08:15 PM
#21
Badass
That engine is so shiny
That engine is so shiny
02-18-2018, 08:19 PM
#22
02-18-2018, 08:24 PM
#23
Haha I feel that.
Do you work at a full machine shop?
Do you work at a full machine shop?
02-18-2018, 08:26 PM
#24
02-18-2018, 08:40 PM
#25
Right on. Currently studying mechanical engineering. Would love to get some more time in with machining.
04-05-2018, 05:22 PM
#26
Registered User
03-20-2019, 06:31 PM
#28
Sorry for being so quiet on this. Been really slow all summer long due to racing motocross every weekend so didn稚 work on it as much as I wanted. But I got a lot more done this winter and is finally getting very close to being done!
As of right now if if there is anything specific you want to know about it or what I did. Feel free to ask and I値l answer. At some point I値l do a full update with all the pictures I致e taken and a run down on what I did.
As of right now if if there is anything specific you want to know about it or what I did. Feel free to ask and I値l answer. At some point I値l do a full update with all the pictures I致e taken and a run down on what I did.
03-20-2019, 08:34 PM
#29
That's exciting!
What did you do for the gas pedal? Use the supplied one?
Are you going to be running A/C?
What did you do for the gas pedal? Use the supplied one?
Are you going to be running A/C?
04-06-2019, 06:40 PM
#30
I知 using the stock Toyota pedal bracket and cut a piece off the Cummings pedal bracket supplied from them and welded it to the Toyota one to make it work. Very tight fit in there since it痴 a eclectical pedal with how big of a body it has. Just barely clears the e-brake and the mechanism for the air system. But it fits perfect in there. Just need to get it right.
And I am not going to be running a a/c unit. My a/c is those triangle windows that fold out.
The following users liked this post:
jazz1 (04-07-2019)
04-15-2019, 01:32 PM
#32
Nice. I think keeping the stock pedal is the way to go.
Very funny with the vent windows for AC! haha
What about an intercooler?
Very funny with the vent windows for AC! haha
What about an intercooler?
07-09-2019, 09:37 PM
#34
Nice.
Where are you currently with the project?
Where are you currently with the project?
07-23-2019, 04:56 PM
#35
Need to push the steering box forward and after that can finish putting it all back together and ready to start it finally and pretty much be done besides repainting the entire truck. Getting very close!
07-25-2019, 04:24 AM
#36
Sweet!
Any pictures of the truck? Std cab or extra cab?
Any pictures of the truck? Std cab or extra cab?
09-10-2019, 07:45 PM
#37
Sorry for being so quiet I知 terrible at keeping up with this lol. So got the truck fired up and running good so far. Did a couple heat cycles and drove it out of the shop and did few laps around my road. Only thing left is finish the exhaust the rest of the way back and repaint the cab and bed I picked up for it and it痴 pretty much all done! But unfortunately I知 getting a second surgery on my hand this week so won稚 be 100% done till I recover from that.
09-22-2019, 11:05 AM
#40
Custom work and good looking truck!
