Wanted: Stock 2001 or later manifolds and crossover
03-10-2010, 01:37 PM
#1
Registered User
Thread Starter
Join Date: Apr 2008
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Wanted: Stock 2001 or later manifolds and crossover
If anyone has these I would like to purchase them. I am moving to Californian in the future and it seems that it is easier to clear everything on the passenger side ie slave, brake/fuel lines with this style of crossover
03-10-2010, 05:16 PM
#2
Registered User
Join Date: Dec 2008
Location: San Diego
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
where you thinking of staying in california? you'll need all the smog control items on the truck. i'm going to be getting my truck BAR'd once i get my engine up. I'm going to try to pass on the conversion x-over. i'll let you know how it goes. i know most of the cali guys say it's next to impossible, but i spoke to the REF and they said it should be an issue as long as it looks stock.
03-10-2010, 05:30 PM
#3
Registered User
Thread Starter
Join Date: Apr 2008
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
The flange is not as big and allows for more clearance from what I can tell. IMO if you are using the stock manifolds, although not from my year vehicle, you should still pass.
from here:
http://www.4x4wire.com/forums/showfl...1&fpart=1&vc=1
from here:
http://www.4x4wire.com/forums/showfl...1&fpart=1&vc=1
Thread
Thread Starter
Forum
Replies
Last Post
justdifferentials
Just Differentials
1
09-17-2015 06:14 PM
mengquis
95.5-2004 Tacomas & 96-2002 4Runners
1
07-13-2015 10:39 AM
