irab88 adds another liter: 22R-EC to 5VZ-FE
#301
I went to the county fair this past weekend, had some good food, and got mildly ill this week. I managed to get one driveshaft on before I had to call it quits, but it fit perfectly.
Q: How do you fit a 5-foot driveshaft in a 4-foot trunk?
A: You don't...
Before I got it lengthened, it just barely fit in my trunk. Now, being about 5 inches longer, it needed some more room. Oh, and this isn't the biggest, dumbest load I've hauled with my car.
This weekend, I want to get it driving. I have the parts, I have the tools, I have motivation. Let's do this!
Q: How do you fit a 5-foot driveshaft in a 4-foot trunk?
A: You don't...
Before I got it lengthened, it just barely fit in my trunk. Now, being about 5 inches longer, it needed some more room. Oh, and this isn't the biggest, dumbest load I've hauled with my car.
This weekend, I want to get it driving. I have the parts, I have the tools, I have motivation. Let's do this!
The following users liked this post:
wslytoy (05-31-2019)
#308
I think McMaster, but not 100% sure. I got the expanding for a few reasons: First, it can fit may different size wires and bundles. Second, it offers good abrasion resistance (main reason). And finally, because it's mesh, it won't trap moisture or dirt. I ordered a couple dozen feet, so I have plenty more for when I re-do the battery setup.
Similar loom can be found on eBay. I find that a lot of good companies have eBay stores to reach customers easier, and often include free shipping.
When cutting it, I needed to cut about 2 inches longer than I needed because the ends would come unraveled a bit when feeding the wire through.
edit: I'm a little bummed this week. They moved me to another location without prior notice, so I've been stressed with longer days. I REALLY want to get this done. Exhaust and interior... that's it.
Similar loom can be found on eBay. I find that a lot of good companies have eBay stores to reach customers easier, and often include free shipping.
When cutting it, I needed to cut about 2 inches longer than I needed because the ends would come unraveled a bit when feeding the wire through.
edit: I'm a little bummed this week. They moved me to another location without prior notice, so I've been stressed with longer days. I REALLY want to get this done. Exhaust and interior... that's it.
Last edited by irab88; 10-18-2017 at 04:58 PM.
#313
Registered User
Join Date: Jan 2011
Location: exo-reality -wave if you see me; Front Range, CO
Posts: 650
Received 93 Likes
on
73 Posts
That was pretty bad-A printing those clips. A while back some one else printed an intake/afm adapter.
I must admit, you've probably pushed me over to doing a 3.4 now. And I needed more procrastination excuses.
Getting antsy waiting here though.
I must admit, you've probably pushed me over to doing a 3.4 now. And I needed more procrastination excuses.
Getting antsy waiting here though.
#315
This weekend I didn't have anything planned! Woo! So I got some work done on cleaning the shop, finishing the exhaust, tweaking the tachometer, and making an ECM bracket.
Added a resistor in series with the potentiometer. This is a 47K ohm, which works for the higher adjustment (117.6), but not the lower (29.4). I need to replace the resistor with a 20k-22k ohm.
And one of the things we're working on at work...
Added a resistor in series with the potentiometer. This is a 47K ohm, which works for the higher adjustment (117.6), but not the lower (29.4). I need to replace the resistor with a 20k-22k ohm.
And one of the things we're working on at work...
Last edited by irab88; 11-19-2017 at 04:46 PM.