My Reg. Cab SAS
 

Hey everyone, I have a 1995 Pickup Regular cab 22re 5 speed. Just ordered my SAS kit from Brian at WabFab with 4" springs. I already have a 3 inch body lift and the plans are for now is to keep the body lift with the 4" spring setup. I'll be running 5.29s with most likely a detroit rear and open front on 36x12.50s. In the rear I plan to run chevy 63's and go from there as far as if I need more lift or blocks in the rear later. What do you all think as far as the setup goes thus far? This thread will be turning into my SAS thread as soon as I start cleaning up my axle and get my parts from WabFab. I already have a custom rear bumper and will be making a custom front bumper with a winch. Most likely a Trail gear style stinger/tube bumper. I am currently a Welder/Fabricator for a Metal/fab shop here in Milwaukee and going to school full time to get my technical degree in Metal Fab/Welding. So I do have some awesome benefits like using school's and works tools and steel. I will post pictures of my Rig Pre SAS and obviously build Pics. Thanks for lookin!

nice man! cant wait to see this!

Some pics of my Rig wheeling and pre SAS

why are my pictures so small!????

wheeling

Nice truck, along with good SAS parts from WabFab. Where in Wisconsin are the pics.

Upload your pics to a free hosting service like photobucket.com
copy and paste the [iMG] code into your post

What axle are you going to run up front?

I have an axle out of an 84' Toyota 4x4... Got it all striped down and all brackets cut off just have a little grinding to do and wait on the parts from Wabfab.....

Pics were taken in Cedarburg, WI. Mudding spot called Procs. PM me is you want more details

how to work photbucket? lol

Looks familiar...

I SAS'd my 1995 (3. SLOW) couple of months ago. Wanted to retain a lower stance. Good luck with the SAS, take your time, and enjoy!

Your stuff shipped out yesterday after you confirmed the address.

:wabbit2:

Subscribed... we're in the same boat :D now what do you guys think about doing a RUF instead of using the springs given in the SAS kit? Which would ride/flex better? Because I also plan on putting chevys in the rear.

Im gonna run the SAS kit springs just cuz they are provided and my stock springs in my truck are shot and I don't want toyota rears up front. idk, I think Wabbits springs will hold more load as well

FINALLY got my kit! Already got the diff armor plate welded and the truss welded, just got to weld the spring perch plate and paint/primer and ready to be built! pics to come as soon as I can get photobucket to work!

AHA! figured out photobucket! this is how my truck stands today...

http://i1336.photobucket.com/albums/...ps84bf8961.jpg

My truck after some good mudding

Wabbit's a good guy - glad you decided to go with him.

Fink:devil: