Changed Interior to LED - Car Won't Start
04-06-2018, 08:28 AM
#1
Registered User
Thread Starter
Join Date: Apr 2018
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Changed Interior to LED - Car Won't Start
2007 4 Runner 150k miles, no problems until last night, decided to change the interior lights to led. Somehow blew a fuse putting in one of the map lights, checked the 10A dome fuse, it was blown. replaced, continued replacing lights.
Finished replacing lights, went to start car and nothing, no click, no crank, nothing, very similar to when the car is in gear and the fail safe doesn't allow it to start.
Ideas?
Finished replacing lights, went to start car and nothing, no click, no crank, nothing, very similar to when the car is in gear and the fail safe doesn't allow it to start.
Ideas?
04-06-2018, 08:36 AM
#2
Registered User
Thread Starter
Join Date: Apr 2018
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Have checked and cleaned battery connection and ground connection, have pulled out and checked all fuses in engine bay and instrument panel fuse box, have pulled out center console trim check if something around gear shift was disturbed so far nothing. Kind of mind blown.
Thread
Thread Starter
Forum
Replies
Last Post
Peevedkitten
86-95 Trucks & 4Runners (Build-Up Section)
11
08-31-2015 06:57 PM
photoleif
86-95 Trucks & 4Runners (Build-Up Section)
0
09-25-2013 08:06 PM
ChildrenOfBodom
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
124
06-24-2012 01:17 PM
