89fourrunner

Has anyone done this? Addicted sells a frame reinforcement kit for their bumpers in case you plan on mounting and using a winch with their bumpers. I want to weld it on and then weld a hitch receiver to the center of it. This way I can run a winch and the stock bumper. I will also be able to take it off and on whenever I please (with a winch hitch mount kit).

Has this been done? Anyone have pictures if it has been done?

Thanks.

dropzone

iTrader: (6)

seems like the process would be the same as the frame reinforcement kit

muddpigg

iTrader: (1)

Might wanna fab something with a bit re-enforcement for loads. That re-enforcement that addicted sales is intended to prevent bolts from pulling through factory crossmember.

wyoming9

iTrader: (1)

Comes down to the skill of the Fabricator!!

Then just what do you plan to drag around .

Is this going in the front or rear??

I most often use my winch on the rear .

The trick with the front is keeping it as tight to the front of the truck as possible