Spindle bushing noise again :(
 

So i pulled the steering spindle and greased it up real good in there and made the spindle bushing noise keep quiet now for a bit more than a month but, it came back. Today. Its only done it once or twice but I know that noise.

Anyone know WHY it came back so quickly? I put buttloads of grease in that spindle, and on the CV shaft. The only thing I noticed is that when I replaced the CV shaft, the remanned one I bought doesnt have this little shield that the other one does. The shield on the CV shaft is after the two joints and it rides fairly close to the opening on the spindle. Do you think it's just losing grease like that and how could I fix this?