http://i118.photobucket.com/albums/o...100_0809-1.jpg

http://i118.photobucket.com/albums/o...1/100_0811.jpg

http://i290.photobucket.com/albums/l...ingPK07028.jpg

http://i290.photobucket.com/albums/l...-June07001.jpg

http://i290.photobucket.com/albums/l...ingPK07033.jpg

http://i290.photobucket.com/albums/l...slidewyota.jpg

love the custom exhaust, props.
lol, i think the 2wd thing would delete the whole prerunner part from the equation, but you could deff swap out parts and make it look like a prerunner

WOW! I love your interior!!!! :banger: :bigok: Can you tell me more about the center? Is it path finder? How did you put down the seats?

That truck is my twin with the color, fender, and toolbox

That center console is called the "Clutter Catcher". You can get it at Pep Boys, Wal-Mart, etc... I've got the same one.

http://i297.photobucket.com/albums/m...7/IMAG0099.jpg

nothin special here just bought it gettin ready to do some work

Haha yeah it is. I'm only running 31's though thats about the only difference. The coat of paint I'm about to put down will seperate us a little.

Yep thats the one. $25 I think it was. Fit perfectly between the two seats.

Do you mean how did I mount the seats?

They pretty much bolted right up except for 1 hole in the front per seat that I needed to drill. I bought those in a junkyard for $50 for the pair.

Those seats had about 2 gallons of mud and broken glass in them when I bought them to.

Heres another good picture of the interior. This is before I put the console in the middle.


http://www.xcelluploader.com//files/...a/Image060.jpg



Forgot to add this pic of my frame paint job. Por-15 ftw.

http://www.xcelluploader.com//files/...ta/painted.jpg

What seat belts did you use?

I used the stock belts. On the side of the seats there is a hole/holder area for the buckle latch. I just ran the stock buckles through there and bolted them to the floor in their original spot.

One of the seat corners shares the same hole.

If you want some buckets get a tape measure and measure from all your mounting holes on your current setup.

Once you get looking around the junkyard you can eyeball different seats that may or may not fit and just take a measurement. The brackets on the bottom of toyota truck and 4 runner seats is a fairly common design.

I want my truck to look like yours when it grows up!!!

Im lovin the pics...:banger: This model is one of my favorite trucks made (thats why i own one) I'll post mine in a few

Here's my '91 2wd:
http://headhunter.h1x.com/91_1.jpg
http://headhunter.h1x.com/91_2.jpg

2wd??? what the hell?

huh? whatcha talkin bout?

[IMG][/Ihttp://i285.photobucket.com/albums/l...n/IMG_2766.jpg

here she is, small tires for now (235/75/15), and the clearcoat is peeling off the hood(dont let mud bake on in the sun!)
http://i278.photobucket.com/albums/k...hotos/yota.jpg

Those dont look like pickups.
We got our own thread....

can we post 4runners to.

holy crap, its so so, BEAUTIFUL!:)