OEM 2nd gen wheels with ADD
#1
OEM 2nd gen wheels with ADD
Any reason the stock 2nd gen 4runner "+" style wheels would not work with add?
Looking at getting a set to replace the steelies on my 2nd gen runner. The runner has ADD and the center caps of the steel wheels are un-familiar to me. Did a search but most stuff was regarding back spacing fitment issues. Anyone know for sure?
Thanks for the help!
Looking at getting a set to replace the steelies on my 2nd gen runner. The runner has ADD and the center caps of the steel wheels are un-familiar to me. Did a search but most stuff was regarding back spacing fitment issues. Anyone know for sure?
Thanks for the help!
#2
Registered User
My 91 4Runner had those "+" style wheels with ADD, the center caps had no whole where a manual hub would stick out.
I can just about guarantee the steelie's center caps will NOT work with the stock wheels. The stock wheels' center caps clip onto the inside of the wheel after the wheel has been installed, vs. the steelies I have (Cragars) the center cap had to be slid into the back side of the wheel prior to mounting.
I can just about guarantee the steelie's center caps will NOT work with the stock wheels. The stock wheels' center caps clip onto the inside of the wheel after the wheel has been installed, vs. the steelies I have (Cragars) the center cap had to be slid into the back side of the wheel prior to mounting.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
FS[PacNorWest]: 1987 Toyota 4Runner $1800 Whidbey Island, WA
coreyedwards7611
Vehicles - Trailers (Complete)
4
01-16-2016 06:38 PM
Steezy96yota
86-95 Trucks & 4Runners (Build-Up Section)
1
07-06-2015 10:00 AM