A new mod on my yota
#1
Registered User
Thread Starter
Join Date: Nov 2006
Location: Pflugerville, TX
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
A new mod on my yota
I order a sway bar from stylintrucks.com because i had so much body roll even when my truck is lowered. but now its awesome, i barely have any body roll we i take hard turns. It only took me about 2 hours to complete. well here are some pics of the difference between the stock sway bar n Belltech sway bar.
#5
Contributing Member
Join Date: Feb 2007
Location: maple ridge, British Columbia, Canada
Posts: 9,055
Likes: 0
Received 9 Likes
on
5 Posts
in your last picture, on the right of the sway bar end link.
See that little this like a ( that looks rusted?
put some grease on there, there is 4 in total. when they rust they make a horrible noise when you go full lock to lock
See that little this like a ( that looks rusted?
put some grease on there, there is 4 in total. when they rust they make a horrible noise when you go full lock to lock
Trending Topics
#8
Registered User
Join Date: Mar 2007
Location: Santa Clara California
Posts: 864
Likes: 0
Received 0 Likes
on
0 Posts
#9
Registered User
Join Date: May 2006
Location: Rio Rancho NM
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
do you want a whole sway bar or what? they basicly make lift blocks for the sway bars that usally come with a lift kit. i had some (if i didn't toss them) off of a 4 inch kit i will see if i will look through my junk and see if i have them if thats what you want PM me and pay shipping and they are yours.
#11
Registered User
do you want a whole sway bar or what? they basicly make lift blocks for the sway bars that usally come with a lift kit. i had some (if i didn't toss them) off of a 4 inch kit i will see if i will look through my junk and see if i have them if thats what you want PM me and pay shipping and they are yours.
Well I don't really care, as long as it fixes the angle that the bar's at right now. I've looked for new endlinks, blocks, and just new swaybars but I haven't been able to find any for 2nd gens...
unhijack
#12
Registered User
Join Date: May 2006
Location: Rio Rancho NM
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
well the stuff i have/had is off of a 95 it was pretty much what gets cut off during a SAC, i got it off a guy local basicly for the diff but i also have all the other crap that came with hub to hub and then some.i think it was pro comp not sure though
#14
Registered User
You haven't looked very hard.....
Here's one link:
http://www.wabfab.org/products/quick...uickdiscos.htm
Here's another:
http://frontrangeoffroadfab.com/nfos...277b52a164137d
How many other links would you like ?
Fred
#15
Contributing Member
Join Date: Feb 2007
Location: maple ridge, British Columbia, Canada
Posts: 9,055
Likes: 0
Received 9 Likes
on
5 Posts
No problemo, back when my dad had my truck he lived with that noise for YEARS.. I finally got it and wanted to find out what was wrong.. 5cents worth of grease later..
#17
Registered User
You've looked and haven't been able to find swaybar disco's for a lifted 2nd Gen ??
You haven't looked very hard.....
Here's one link:
http://www.wabfab.org/products/quick...uickdiscos.htm
Here's another:
http://frontrangeoffroadfab.com/nfos...277b52a164137d
How many other links would you like ?
Fred
You haven't looked very hard.....
Here's one link:
http://www.wabfab.org/products/quick...uickdiscos.htm
Here's another:
http://frontrangeoffroadfab.com/nfos...277b52a164137d
How many other links would you like ?
Fred
Sorry for hijacking your thread, but hey I'll be following your lead soon, and it looks good.
#19
Contributing Member
iTrader: (1)
Shoes, I don't mean to hijack, but this is the only way I can communicate with you...
You sent me a PM recently and when I attempted to respond to it, I got the following message:
Then I tried to email you, but got this message:
Seems you don't want people talking to you...
So, do you want me to answer you here or what?
You sent me a PM recently and when I attempted to respond to it, I got the following message:
shoes138 has chosen not to receive private messages or may not be allowed to receive private messages. Therefore you may not send your message to him/her.
Sorry! That user has specified that they do not wish to receive emails. If you still wish to send an email to this user, please contact the administrator and they may be able to help.
So, do you want me to answer you here or what?
#20
Registered User
Thread Starter
Join Date: Nov 2006
Location: Pflugerville, TX
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
DAMNIt!!! i thought i fixed that grrrr........well i wanted to know if you still had entry buzzer from your 4 runner, cuz if ou do would like to snag it!