need some flares for my 32x11.5 tyres
#1
Registered User
Thread Starter
Join Date: Jan 2009
Location: SYNDEY, AUSTRALIA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
need some flares for my 32x11.5 tyres
hey guys, I bought some bfg 32x11.5 tyres off fleabay to go with the LC coils/ new shocks that i am putting in the rear, so i thought i would test fit the new tyres before i start work on the rear end and they stick out real bad! I thought i could get away with no flares, but no way! they stick out about 1.5 inch on each side! has anyone made up there own flares on the cheap? anyhelp would be great.
cheers
cheers
#2
Contributing Member
Join Date: Jul 2003
Location: Orlando, FL
Posts: 9,076
Likes: 0
Received 0 Likes
on
0 Posts
hey guys, I bought some bfg 32x11.5 tyres off fleabay to go with the LC coils/ new shocks that i am putting in the rear, so i thought i would test fit the new tyres before i start work on the rear end and they stick out real bad! I thought i could get away with no flares, but no way! they stick out about 1.5 inch on each side! has anyone made up there own flares on the cheap? anyhelp would be great.
cheers
cheers
Bushwacker is always a good fit as I'm sure you know - being from Down Under and all.
Fink
Thread
Thread Starter
Forum
Replies
Last Post
94toyy
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
12
09-14-2015 06:18 AM
justdifferentials
Vendors Build-Ups (Build-Up Section)
0
09-05-2015 06:52 PM