My ISR/Deckplate (Pics inside!)
06-26-2008, 05:22 PM
#1
Contributing Member
Thread Starter
My ISR/Deckplate (Pics inside!)
I dont have the pics of the deckplate holes because i forgot the camra while i was installing it back in the vehicle.
I drilled 6 holes in the bottom and removed the little box on the side. I thank member Dublin for the idea, i went to the junkyard and got a long pipe that fits that pipe ontop of the MAF so that i dont have to have that little box.
I drilled 6 holes in the bottom and removed the little box on the side. I thank member Dublin for the idea, i went to the junkyard and got a long pipe that fits that pipe ontop of the MAF so that i dont have to have that little box.
06-26-2008, 05:24 PM
#2
Contributing Member
Thread Starter
That's my $5 ISR. i got a 1/2 brass fitting because they had no smaller sizes in town. and i blocked the Intake silencer rather than buy pipe that has the right bend. Cause one day soon i am going to move it up for the snorkel AND a second battery.
06-26-2008, 05:39 PM
#3
Registered User
Cool deal. How does the truck perform now?
I did mine for like $29.
http://www.ultimateyota.com/index.ph...=3819.msg37131
Frank
I did mine for like $29.
http://www.ultimateyota.com/index.ph...=3819.msg37131
Frank
06-27-2008, 04:09 AM
#6
Contributing Member
Thread Starter
Intake Silencer Removel. those little boxes beside the intake box silence the intake and rob the motor of air and power. After doing mine i do feel a slight increase in low end power, and with my free flowing exhaust, i'm going to the track this weekend to try out the 0-60 and 1/4 mile and see what happens. But i know i should accomplish at least 127HP out of the rated 150 which is pretty damn good for the 3.0
Thread
Thread Starter
Forum
Replies
Last Post
Jcrawl94
84-85 Trucks & 4Runners (Build-Up Section)
10
10-24-2015 04:34 PM
crashburnoveride
86-95 Trucks & 4Runners
1
07-10-2015 06:39 AM
