Motor Swap from 4th to 3rd
01-04-2010, 02:29 PM
#1
Registered User
Thread Starter
Join Date: Jan 2010
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Motor Swap from 4th to 3rd
I totaled my '00 4runner a week ago 
My neighbor has a '92 pickup with the 3.0, which has a blown motor. He wants to swap my motor, which is the 3.4 5VZ-FE. it's seems very feasible and looks like it won't require too much modification.
I'm sure it has been done before. Any information on what is required and what problems to expect would be greatly appreciated. Thanks :-)
My neighbor has a '92 pickup with the 3.0, which has a blown motor. He wants to swap my motor, which is the 3.4 5VZ-FE. it's seems very feasible and looks like it won't require too much modification. I'm sure it has been done before. Any information on what is required and what problems to expect would be greatly appreciated. Thanks :-)
Last edited by CountryRoads304; 01-04-2010 at 02:44 PM.
01-04-2010, 02:35 PM
#3
Registered User
SEARCH BOY!!!!...and first off a '92 pickup CAN'T have both the 22RE AND the 3.0 in the same truck...at least not running lol
and again...SEARCH!!! it's rather extensive..and will cost well over $1000-$2000 not including the cost of the motor
and again...SEARCH!!! it's rather extensive..and will cost well over $1000-$2000 not including the cost of the motor
01-04-2010, 02:44 PM
#6
Registered User
Thread Starter
Join Date: Jan 2010
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Well that's what my neighbor said. It's definitely a V6 in the '92... I'm not good at searching so I figured someone could steer me in the right direction. I have the motor so that should save me a good bit. What's so expensive about the swap?
Last edited by CountryRoads304; 01-04-2010 at 02:45 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM
