How much lift with Rancho torsion bars?
#1
Registered User
Thread Starter
How much lift with Rancho torsion bars?
So on my local CL some guy is selling Rancho torsions for 86-95 toyota 4x4's and claimed that they were ran with 2 inch blocks... Will upgraded torsion bars actually lift me 2 inches or does that mean he "ran up" the bars? I was planning on running these with 2 inch lift springs in the back (OME or NWOR) just to get a bit of lift. I'm not throwing away the idea of BJ spacers, but at $80 obo it's just that much cheaper. Anyone have knowledge on these and if they are a good setup or not?
Link to CL ad: http://bellingham.craigslist.org/pts/3147542829.html
Link to CL ad: http://bellingham.craigslist.org/pts/3147542829.html
#2
Registered User
If it's purely height you are after or you plan on running dual batteries, heavy bumper/winch combo or doing some desert runs I'd get them.
If you plan to get THAT much lift I'd go with low profile bumpstops or you'll be in for a pretty rough ride.
I had SAW torsion bars on an 89 4Runner with Deaver springs and the front was stiff as could be with just the stock set up and torsion bars.
I wouldn't advise that you use them on a stock truck and bj spacers are not much more expensive at all. I haven't ran bj spacers but I plan to. I like the idea of some lift without increased stiffness/decreased articulation.
Just my .02
If you plan to get THAT much lift I'd go with low profile bumpstops or you'll be in for a pretty rough ride.
I had SAW torsion bars on an 89 4Runner with Deaver springs and the front was stiff as could be with just the stock set up and torsion bars.
I wouldn't advise that you use them on a stock truck and bj spacers are not much more expensive at all. I haven't ran bj spacers but I plan to. I like the idea of some lift without increased stiffness/decreased articulation.
Just my .02
Last edited by Luvmeye22re; 08-28-2012 at 09:22 PM.
#4
Registered User
Thread Starter
Okay, guess I won't get them! lol. I figured it would be an easy swap and ride well, but since it's not... Thanks for the help guys!
/endthread
/endthread
Thread
Thread Starter
Forum
Replies
Last Post
89fourrunner
86-95 Trucks & 4Runners
3
02-17-2016 06:52 AM
coffey50
Offroad Tech
17
07-28-2015 10:55 AM