Cranks, wont fire. Cylinder head replace.
#1
Registered User
Thread Starter
Join Date: May 2013
Location: NW WA
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Cranks, wont fire. Cylinder head replace.
I've replace the cylinder head on my 87 4Runner.
Marks on the timing chain/cam valves and distributor are all where they should be.
I checked on the fuel injectors, they are in in place.
New plugs and wires.
If the timing is changed on dist..there is a backfire that blows off the air clean hose.
Seems to be suction on tailpipe.
I've adjusted the chain several times and I still have no fire.
Please, any suggestions are welcome.
Marks on the timing chain/cam valves and distributor are all where they should be.
I checked on the fuel injectors, they are in in place.
New plugs and wires.
If the timing is changed on dist..there is a backfire that blows off the air clean hose.
Seems to be suction on tailpipe.
I've adjusted the chain several times and I still have no fire.
Please, any suggestions are welcome.
Thread
Thread Starter
Forum
Replies
Last Post
kgcwb44
86-95 Trucks & 4Runners (Build-Up Section)
4
01-29-2023 10:02 AM
GreatLakesGuy
The Classifieds GraveYard
8
09-04-2015 09:27 AM