ch-ch-ch-ch-check it out!!! *PICS*
#1
Registered User
Thread Starter
Join Date: Jan 2007
Location: Chico Republic, NOR*CAL
Posts: 1,987
Likes: 0
Received 0 Likes
on
0 Posts
ch-ch-ch-ch-check it out!!! *PICS*
here's some pics of my baby:
i did this isr today. i think it turned out pretty nice looking. it out performs my expectations and i also cleaned the throttle body and dropped in a k&n stock replacement. vroooooooom!
tranny also shifts faster/smoother when you step on it.
here's the swaybar discos that i put on her:
street style for the hidden delta 40
and this is the stance after the OME suspension.
i did this isr today. i think it turned out pretty nice looking. it out performs my expectations and i also cleaned the throttle body and dropped in a k&n stock replacement. vroooooooom!
tranny also shifts faster/smoother when you step on it.
here's the swaybar discos that i put on her:
street style for the hidden delta 40
and this is the stance after the OME suspension.
Last edited by yotasavg; 05-14-2007 at 03:55 PM.
#2
Looks really good. Nice job.
When I was running an open valve breather like yours, I was getting a lot of oil smell inside the cab while I was driving. Are you having any problems with that? Eventually, I had to plumb it back into the intake pipe.
When I was running an open valve breather like yours, I was getting a lot of oil smell inside the cab while I was driving. Are you having any problems with that? Eventually, I had to plumb it back into the intake pipe.
#4
Registered User
Thread Starter
Join Date: Jan 2007
Location: Chico Republic, NOR*CAL
Posts: 1,987
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the comments. keep em coming.
Trending Topics
#8
Registered User
Thread Starter
Join Date: Jan 2007
Location: Chico Republic, NOR*CAL
Posts: 1,987
Likes: 0
Received 0 Likes
on
0 Posts
the guy that bent my exhaust hooked it up for free. i'd rather have a mandrel bend but free things appeal to me!
naw, can't these are still fully treaded. didn't plan on lifting it so soon. my bad, but i was running on slicks!!!
at full flex though, they tuck up in the wells real nice.
yeeee haw, bigger tires. wooo. lol. be like me.
Time for bigger tires. Looks good though, nice and clean stance.
at full flex though, they tuck up in the wells real nice.
#11
Registered User
Thread Starter
Join Date: Jan 2007
Location: Chico Republic, NOR*CAL
Posts: 1,987
Likes: 0
Received 0 Likes
on
0 Posts
has nobody but chickenlover and i done this? has anyone else done both? post up boys!
#14
Registered User
Thread Starter
Join Date: Jan 2007
Location: Chico Republic, NOR*CAL
Posts: 1,987
Likes: 0
Received 0 Likes
on
0 Posts
#15
if ya take out that stock airbox and put on a aftermarket filter it makes a world of diffrence it is a bit louder but it sounds nice and throttle response and fuel economy go up to. if you are worried about having something like an aftermarket air filter on there you can always buy a shield ya can take off an on. just thought i'd help
#16
Registered User
Thread Starter
Join Date: Jan 2007
Location: Chico Republic, NOR*CAL
Posts: 1,987
Likes: 0
Received 0 Likes
on
0 Posts
if ya take out that stock airbox and put on a aftermarket filter it makes a world of diffrence it is a bit louder but it sounds nice and throttle response and fuel economy go up to. if you are worried about having something like an aftermarket air filter on there you can always buy a shield ya can take off an on. just thought i'd help
thanks for the help guys. i really is appreciated.
#20
Registered User
i do have a different motor, i have a 22rtec, but its a good amount, it will fill the o on toyota on my valve cover and sometimes there's a little pool on the back of the valve cover. it only happens when i go on long drives.