Beck Arnley Ball Joint Pictures
8 Attachment(s)
Hey Everyone ... this just an FYI thread :-)
I was shopping around to purchase a new set of Ball Joints (upper & lower) for my pickup and I wasnt sure which brand or the place should I buy them from. Obvious pick was buying at the Local Dealership ... but the prices were way too expensive. Online toyota dealers are much more affordable. Long story short, These were the price quotes I got: Oreilly / Kragen: $54.99 for Beck Arnley Brand (Upper) Auto Hauz: $54.96 for Sankei 555 Brand [http://www.autohausaz.com Dealership Local: $78 for Toyota Brand Toyotapartszone.com: ~$53.74 for Toyota Brand Rock Auto: $33.89 for Beck Arnley Brand (Upper) [http://www.rockauto.com I really wanted to go for either OEM or Japanese Sankei '555' Brand .. which I heard are the best! For some odd reason, I cheap'ed out and went for Beck Arnley I got the parts in the mail from Rock Auto today and noticed that the upper Ball Joints from Rock Auto are actually Japanese '555' Brand re-labelled as 'Beck/Arnley' .. Score! Cheap and OEM :laugh: Here are the Pictures: 1. Upper Ball Joints from Beck/Arnley - Part # 101-4149 Attachment 200029 Attachment 200030 Attachment 200031 Attachment 200032 Attachment 200033 2. Lower Ball Joints from Beck Arnley - Part# 101-4879 Didn't get lucky here since the part is not from Japan, but from Korea and is not the same as Japanese OEM quality .. it was super cheap at $24.79 Attachment 200034 Attachment 200035 http://i461.photobucket.com/albums/q...owerBJ-003.jpg Attachment 200036 Hope this helps someone who is the same situation as me! |
Beck Arnley parts are actually pretty good parts, ive used them before on other toyota trucks that ive had, and ive never had any problems with there parts.
|
only suspension parts i had a prob with is the ebay kit...where its like 70 bucks for all the tie rods and idler arm...lol didint last 6 months..but its cool i went SAS lol
|
1 Attachment(s)
Beck/Arnley tierods are also Made in Japan with 555 stamped on them too. Just got inners & outers last week for my 4Runner.
Attachment 200037 For my ball joints, I went OEM from my dealer, but I work there so I got all 4 for $197 including 6% PA tax |
Most of the time, Beck Arnley parts are rebagged OEM parts, which is why I tend to buy them over most aftermarket brands
|
Harbir - how's the IFS lift project coming along?
|
The housing/ casting will rust after the first good rain you roll through. Just FYI.
I wish I wouldn't have cheaped out on moog/555 and went with OEM instead. :dj: |
All times are GMT -8. The time now is 12:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands