anyone on wednesday, 11/5, have the day off in san diego?
11-02-2008, 05:57 PM
#1
Registered User
Thread Starter
anyone on wednesday, 11/5, have the day off in san diego?
anyone have that day off and willin to help me try to find the misfire in my 22re? its so bad now i can barely drive it above maybe 45. im sure its cylinder 3, which to get to i would need to take off the EFI/intake manifold, so i have adequate room to solder the wires. anyone down to help? ill make it worth your time.
11-02-2008, 09:07 PM
#2
if you wanna pay for me to drive down there... wensdays are days when i dont have school...
i have the info here... if you really want me to come out...
http://www.mapquest.com/maps?1c=Wilt...81&2v=CITY&r=s
should only be about 160 bucks...
i have the info here... if you really want me to come out...
http://www.mapquest.com/maps?1c=Wilt...81&2v=CITY&r=s
should only be about 160 bucks...
Last edited by space-junk; 11-02-2008 at 09:08 PM.
11-03-2008, 05:12 AM
#6
Registered User
Thread Starter
ill pay for some beer, i dont kid about beer. a man who kids about beer makes enemies very easily. and i need to solder wires cuz the P.O decided to cut the injector lines to put in some ebay 'performance chip' and then found out he cut the wrong ones, so put it on the IAC sensor. which he just spliced the fuel injector cords, didnt solder them. (hence why theres still a chip with a switch in the glovebox. i dont notice much except that my gas mileage drops from around 19 to 10mpg. why i havent used it at all except to see 'hey whats this do???' lol) i tried to fix them back in february, and seemed to fix it for awhile. id still like to make 100% sure thats the issueand scuba, what do you think your time is worth? some beer? maybe lunch?
11-03-2008, 09:55 AM
#7
Registered User
Join Date: Sep 2008
Location: Vancouver, WA
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
lol, Id help for free if you can make it victorville, I heven have a garage with a rolling cabinet jam packed with tools.
I dont have the days off, but I do work from home, and after 5pm, its free reign.
In fact, i had a similiar issue on my truck, had to replace ALL the connectors under my hood, and redo the harness... came out ultra sweet, fireproof, and water proof!
heres my write up: https://www.yotatech.com/forums/f116...ectors-157918/
I dont have the days off, but I do work from home, and after 5pm, its free reign.
In fact, i had a similiar issue on my truck, had to replace ALL the connectors under my hood, and redo the harness... came out ultra sweet, fireproof, and water proof!
heres my write up: https://www.yotatech.com/forums/f116...ectors-157918/
Last edited by mnmontana; 11-03-2008 at 09:58 AM.
Trending Topics
11-03-2008, 10:17 AM
#8
Registered User
Join Date: Jan 2007
Location: Michigan
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
You might have found your problem there, solder those leads back up nicely, and see if it solves your problem. While your at it, make sure he didn't pull one of the plugs off the injectors or something dumb. Wait, just thought about it, but pull the spark plugs one at a time and when you get to the plug that doesn't effect anything, you found your cylinder.
Last edited by Swansen; 11-03-2008 at 08:54 PM.
11-03-2008, 03:26 PM
#9
Registered User
Join Date: Jan 2007
Location: milwaukee, WI baby muddin in the streets!!
Posts: 2,801
Likes: 0
Received 1 Like
on
1 Post
oh man buddy you know im down to help heck i owe you one from when you helped me but yeah i dont think ill make it there if i even try lol my hg is blown but yeah you know if i were closer man i would in a heart beat!!!! wish i still was in cali lol
11-03-2008, 06:53 PM
#10
Registered User
Thread Starter
and to everyone, thanks for your advice, on wed in the morning i will do everything suggested here. if i had more than one day off, then i would drive out to victorville, im sure it would make it... lol. but alas i only have one day off... dammit i want my truck back im getting addicted to the expedition! lol. thanks again everyone. and, one question, to solder the injector cables, do i have to remove the upper intake?
11-03-2008, 07:22 PM
#13
Registered User
hah, maybe one hour away.
Im honestly thinking 5 bucks for gas..and im a lightweight...so not much beer..
are we just going to solder some wires together...?
Im guessing you have a soldering iron..or do i need to lift the pops' for the day..?
Im honestly thinking 5 bucks for gas..and im a lightweight...so not much beer..
are we just going to solder some wires together...?
Im guessing you have a soldering iron..or do i need to lift the pops' for the day..?
11-03-2008, 07:53 PM
#14
Registered User
Thread Starter
i got a weller soldering gun. i think thats all we need to do... hence why i want someone more experienced than i am in this field.. i SUCK at diagnostics... LOL.
11-03-2008, 07:56 PM
#15
Registered User
I can solder fairly well, my dad used to do it for a living, and he taught me...
So I can do as much as possible to trouble shoot and then do what i can with soldering...
You have my number, just let me know
So I can do as much as possible to trouble shoot and then do what i can with soldering...
You have my number, just let me know
11-03-2008, 10:59 PM
#18
Registered User
hah, lol member he said he couldnt drive it over 35...
Lol, that would be sweet though, all 3 of us gettin stuff done within 25 feet
Lol, that would be sweet though, all 3 of us gettin stuff done within 25 feet
Last edited by scuba; 11-03-2008 at 11:10 PM. Reason: Sorry corey, my badd
11-04-2008, 05:20 AM
#19
Registered User
Thread Starter
actually, i had to drive it to 711 this morning, and though its still misfiring, it will keep to the speed limit. and meant 'will do work too'. so i guess if i hgave to ill drive up to elsinore....
11-04-2008, 05:34 AM
#20
Contributing Member
Join Date: Jul 2008
Location: San Diego CA
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Dude! If you end up needing professional help, I seriously recommend “The Truck Shop” 8650 Miramar rd, 858-967-2141. in my opinion James really knows what he’s doing on Toyotas and he’s honest. Good luck!
