Anyone using stock front seatbelts as rear shoulder belts in a 1st gen?
12-16-2007, 06:35 AM
#1
Registered User
Thread Starter
Join Date: May 2003
Location: Ottawa, Canada
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Anyone using stock front seatbelts as rear shoulder belts in a 1st gen?
Hi all,
I've done some research and it looks like some people have tried this. Does anybody have some pics of the install and whether there were any issues involved in the swap? I know there are factory rear shoulder belts that you can get for around $110 a piece, but it seems like some people are saying that you can use stock front belts just fine. Is this true? I'm not too worried about the middle seat, just the sides.
I've done some research and it looks like some people have tried this. Does anybody have some pics of the install and whether there were any issues involved in the swap? I know there are factory rear shoulder belts that you can get for around $110 a piece, but it seems like some people are saying that you can use stock front belts just fine. Is this true? I'm not too worried about the middle seat, just the sides.
12-16-2007, 11:43 AM
#3
Registered User
Join Date: Aug 2006
Location: ruffin, NC
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
front belts
I have front belts from a regular cab yota in the rear of my runner and they work ok. They dont lock like the newer belts do and its easy for the 3 yr old to wiggle out. I am thinking of bitting the bullet and picking up a new set. I believe you have to use regular cab truck belts! Someone correct me if i am wrong.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
WTB[WestCanada]: 1989 4runner stock front bumper and other items
lledwod
Items Wanted
1
08-30-2016 01:03 PM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 12:15 PM
