Anyone install 1st gen inclinometer into 2nd gen WITH write up?
#1
Registered User
Thread Starter
Anyone install 1st gen inclinometer into 2nd gen WITH write up?
Hey guys, I just received a first gen 4Runner inclinometer from my buddy for free tonight. I would like to install it into my 4Runner. I found this thread
https://www.yotatech.com/forums/f116...r-mods-134628/
That looks pretty clean, has anyone seen a write up from anyone as far as actually installing one of these into the dash? I found the 4Crawler link, and a few others but none are of any use or help to a 2nd gen. I looks like this guy chopped the bezzel up a little to make it fit
https://www.yotatech.com/forums/f116...r-mods-134628/
That looks pretty clean, has anyone seen a write up from anyone as far as actually installing one of these into the dash? I found the 4Crawler link, and a few others but none are of any use or help to a 2nd gen. I looks like this guy chopped the bezzel up a little to make it fit
#2
Registered User
Thread Starter
#4
Registered User
Thread Starter
I have some vacation time coming up Thursday, so i will try tackling it, i'll have to drop the glove box and see if I can easily drill the flat part of the passenger dash like the 2 threads I posted, it seems like it will fit there nicely with trimming to the outter case of the inclinometer, the tan interior I posted def looks like its trimmed
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
crashburnoveride
86-95 Trucks & 4Runners
1
07-10-2015 06:39 AM
Steezy96yota
86-95 Trucks & 4Runners (Build-Up Section)
1
07-06-2015 10:00 AM
FS[SouthEast]: 1st Gen 4Runner Slider Window, Driver Side
coryc85
Misc Stuff (Vehicle Related)
0
07-06-2015 04:07 AM