thook

hey guys...i'm at a loss. done trying to find a good how-to for 2nd gen interior, so thought perhaps someone here would be gracious and point me to one. unless you can say how?

i've got plugged up sunroof drain tubes. i already cleared the front ones, but need to get to the rear ones. i found a thread that shows an after the fact, but doesn't explain how he removed the paneling. i just don't want to break anything. as a note, i do have a trim removal tool.

thanks!!

thook

59 views and no one?

old87yota

Well.. I viewed it.... but I do not have a truck with a sunroof to refer to nor have I ever done one.....

Also, it might take some time for someone to chime in who knows the answer. Most of these trucks do not have sunroofs.

thook

ah, but it's a 4runner and much of them do. maybe most everyone has trucks anymore...haha! thanks..

Co_94_PU

iTrader: (-1)

Been a while, from memory.. The only screws are in the scuff plate at the bottom of the door, remove two or three of these to pop off the lower, and then the upper panels which are just snapped into place.

thook

this is the area i need to get to...

thook

that's not my photo/vehicle, btw....