87 4runner SAS lift ?'s
02-09-2008, 06:03 AM
#1
Registered User
Thread Starter
Join Date: Jan 2008
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
87 4runner SAS lift ?'s
i want to hear the pro's and con's of the two main idea's ive heard for doing a lift on a SAS rig.
Right now the truck has stock front springs and blocks in the rear it clears 36" tsl's with no problems. i want to get rid of the blocks, have some good flex (wheeling rig only want to be a good all around wheeler) and clear 38x11 boggers.
The cheap way i've heard to get a few inch's and good flex is to run stock rear springs up front, and 63" chev springs in the rear, or the 4" lift springs in the rear.
Or would i be better of doing the 5" springs all around please any info and input is much appreciated.
Right now the truck has stock front springs and blocks in the rear it clears 36" tsl's with no problems. i want to get rid of the blocks, have some good flex (wheeling rig only want to be a good all around wheeler) and clear 38x11 boggers.
The cheap way i've heard to get a few inch's and good flex is to run stock rear springs up front, and 63" chev springs in the rear, or the 4" lift springs in the rear.
Or would i be better of doing the 5" springs all around please any info and input is much appreciated.
02-09-2008, 08:41 PM
#5
Registered User
Join Date: Oct 2007
Location: Kingman AZ
Posts: 1,125
Likes: 0
Received 0 Likes
on
0 Posts
to clear thoses tires i would run a a 4inch longtravel allpro front springs and 63s in the rear you might have to trim the fenders or just add a set of all pro 5inch springs and keep your fenders clean either way it would handle the roads really well
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
GreatLakesGuy
The Classifieds GraveYard
8
09-04-2015 09:27 AM
FS[NorAtl]: 05+ tacoma leveling lift front MA
akaphilly
Axles - Suspensions - Tires - Wheels
0
07-09-2015 02:18 PM
skoti89
Off Road Trip Planning, Expeditions, Trips, & Events
0
07-06-2015 07:45 PM
