The '86 is worm food........
Motor, tranny, drivetrain, etc, etc is all still good, but it has finally come to pass. The '86 was rusty when I originally bought her, but after 10yrs of dedicated service the frame gave way from internal rust.:bowdown2: The rear pass. shock absorber peeled off the frame coming home a little over a week ago. Some of you all familiar with my 4rnr may have seen the pics of my loading her to the max. Well, she's done....fine....kaplooey. Now I just have to wait and find a chassis to throw all my parts on.
Who's got one around Arkansas?:coffee: |
Paying homeage to the Red One......
http://i34.photobucket.com/albums/d1...oadeddown2.jpg http://i34.photobucket.com/albums/d1...loadeddown.jpg (Somebody grab a horn and play some Taps, please) |
WOW!
It sure looks good in those pictures. Sorry to hear about your loss. It sounds like one day soon those organs will be come to life in another body. :rockin: |
Pssst.... Rust can be fixed.
|
lol nice thook
i should have taken pictures when i had half of a '90 mustang gt in the back of my 4runner using it as storage |
sucks about the runner man I actually just cut out and ground down some rust on my 90 yesterday. there was a little rust above the muffler and a small spot below the driver's side door that turned into a hole after I ground it down. Rust sucks! at least you still have a solid piece of land though.
although, like the canadian said rust can be fixed...have you seen the rust they deal with up there? Our east coast rust pales in comparison to theirs. |
|
That's crazy, how does it get that bad? people just don't wash their trucks in the winter? you couldn't even get that thing street legal down here in mass
|
Originally Posted by pruney81
(Post 51266570)
That's crazy, how does it get that bad? people just don't wash their trucks in the winter? you couldn't even get that thing street legal down here in mass
Snow + salt + -45 + 20 year old truck = that. Obviously I had to do a load of bodywork on it to get it street legal, but I did it. |
Here's my own personal truck that's been in the family since 1997:
http://img150.imageshack.us/img150/8...mera001eu3.jpg http://img392.imageshack.us/img392/2...mera004ft5.jpg Now this is what it looks like: https://img11.imageshack.us/img11/6067/dscn1354p.jpg https://img5.imageshack.us/img5/3001/dscn1398mu.jpg No bloody way I'm ever painting it though, I bang it up too much offroad. |
do you have any pics of where the frame rusted through thook?
|
R.I.P. I had a '87 X-cab pu that broke in half :(
|
[youtube]I6yFTZsJCxY[/youtube][youtube]grbSQ6O6kbs[/youtube]
:think: don't know why it's showing up twice... maybe it's just that good? |
I was thinking of the same vids when I started reading this thread......lol. I'll add this 1:[YOUTUBE]WlBiLNN1NhQ[/YOUTUBE]
Don't cry Thooky boy! You'll get a new 1..... |
lmao im not dead yet haha
|
Thanks for the sympathy and the humor, guys. When the timing is right, another chassis will turn up.
As for saving it, I don't think there's much that can be done. Well, really nothing. There's nothing to weld to and you can't get inside the frame adequately to treat the rust.......which was the problem in the first place. Besides, there's big holes in the body in rear cargo area....a big hole in the driver's floor board (big enough for a soccer ball), and I would imagine pretty much any fastener to be removed/replaced for any attempt at restoration is frozen solid. A few years ago, something could have been done for the body. But, it's one of those things. You keep meaning to get to it and life just kinda gets in the way. So, I'm really not going to mess with it. There's lots to salvage off of her, though. That won't even start until it's warm and dry, again. Nice job on the resto, turboboost. I think I'd atleast rattle can that primer and bondo. Get funky wit' it, even. Be creative. No pics right now, pruney. If I have time at some point, I might take a few shots to make you grind your teeth. It's pretty bad.....haha. Abe.....Freak.....thanks for the laugh. I needed one today. Everything seems to be breaking, lately. The '86, the washing machine, a couple weeks ago it was the wellhouse plumbing, it goes on. I just keep grinning and try to get things fixed as I can. I hope I can get it all squared away before it starts freezing outside. Dang.....:) |
hehe
[youtube]JWVshkVF0SY[/youtube] |
and it's nice to see I'm not the only one seeing double vision....
[youtube]a6Oo79f742Q[/youtube] |
and for the record...
... Obama promised "change". ;) |
I think hes delivering on that promise,after cap & tax,health reform and all the bailouts all we will have left is change.
|
All times are GMT -8. The time now is 01:06 AM. |
© 2024 MH Sub I, LLC dba Internet Brands