1990 - 1995 Part Swap
01-07-2010, 06:30 AM
#1
Registered User
Thread Starter
Join Date: Dec 2009
Location: New Jersey
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
1990 - 1995 Part Swap
I have a rusty 1990 3.0 4WD pickup that is a donor for my 1995 22RE 4WD pickup. Does anyone know if the cold start injector timer switch, front brake calipers, and radiator are interchangable?
01-07-2010, 06:33 AM
#2
Calipers and radiator should swap. On the cold start timer, see if the connectors are the same and then see if it will physically fit and then you could look up the time/temperature specs on the two parts in a Factory Service Manual and see if they are similar.
Thread
Thread Starter
Forum
Replies
Last Post
MMA_Alex
86-95 Trucks & 4Runners (Build-Up Section)
25
04-18-2017 05:07 AM
FS[SouthEast]: Mercury Villager Fan & DCC Fan Controller
coryc85
Misc Stuff (Vehicle Related)
6
09-09-2015 06:24 AM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 12:15 PM
