FS[FourCorners]: APOR uni-ball Upper Control Arms - 95.5-04 Taco, 96-02 T4R
09-05-2016, 09:08 AM
#1
Registered User
Thread Starter
APOR uni-ball Upper Control Arms - 95.5-04 Taco, 96-02 T4R
SOLD
Selling a set of All Pro Off Road upper control arms for 1st Gen Tacoma or 3rd Gen 4Runner. They are used and unknown mileage on them as they were on the truck I just bought and the guy used them on this truck and another truck prior.
They are in good shape, but they have a small bit of movement in the uni-ball which seems to equate to a "clunk" sound I'm having in the front end. You can buy new uni-ball joints from All Pro and freshen these up when you install them. Bushings look great--nice and greasy still. No chunks or tears. These are the greasable arms with the zerk fittings on them. (EDIT: after my new UCAs were installed, I've still got the clunk, so these are prob just fine... :-/ )
Selling a set of All Pro Off Road upper control arms for 1st Gen Tacoma or 3rd Gen 4Runner. They are used and unknown mileage on them as they were on the truck I just bought and the guy used them on this truck and another truck prior.
They are in good shape, but they have a small bit of movement in the uni-ball which seems to equate to a "clunk" sound I'm having in the front end. You can buy new uni-ball joints from All Pro and freshen these up when you install them. Bushings look great--nice and greasy still. No chunks or tears. These are the greasable arms with the zerk fittings on them. (EDIT: after my new UCAs were installed, I've still got the clunk, so these are prob just fine... :-/ )
Last edited by theferg; 11-13-2016 at 11:08 AM.
Thread
Thread Starter
Forum
Replies
Last Post
DOK
95.5-2004 Tacomas & 96-2002 4Runners
2
04-09-2017 06:02 AM
KryptoRoxx
95.5-2004 Tacomas & 96-2002 4Runners
3
02-14-2016 12:19 PM
btu44
86-95 Trucks & 4Runners
12
02-07-2016 06:18 PM
