4x4 sequence
05-22-2017, 08:09 AM
#1
Registered User
Thread Starter
Join Date: Mar 2017
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
4x4 sequence
Hi ,
Wondering if anyone can tell me the sequence once you hit the 4x4 button . I'm having the green 4hi blinking when I try to engage 4x4.Was told it was transfercase actuator so I changed it ,still same issue .I replaced the front dif actuator a few years ago but when that went out I could still hear the transfercase actuator trying to engage but this time I dont hear anything happening underneath ,seems like no power ?Does the front dif actuator activate or have to engage before the transfercase actuator or vice verca? I've tried all the usual things ,back up ,go ahead ,put in neutral,tap with hammer etc with no luck .Could it be a sensor or something .all fuses are good.I got a 2005 Tundra 4x4 DC SR5 V8
Wondering if anyone can tell me the sequence once you hit the 4x4 button . I'm having the green 4hi blinking when I try to engage 4x4.Was told it was transfercase actuator so I changed it ,still same issue .I replaced the front dif actuator a few years ago but when that went out I could still hear the transfercase actuator trying to engage but this time I dont hear anything happening underneath ,seems like no power ?Does the front dif actuator activate or have to engage before the transfercase actuator or vice verca? I've tried all the usual things ,back up ,go ahead ,put in neutral,tap with hammer etc with no luck .Could it be a sensor or something .all fuses are good.I got a 2005 Tundra 4x4 DC SR5 V8
Last edited by Sgt.Slaughter; 05-22-2017 at 08:11 AM.
