2006 Tundra 4WD Manual Hub Conversion
12-19-2016, 10:01 PM
#1
Registered User
Thread Starter
Join Date: Dec 2016
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
2006 Tundra 4WD Manual Hub Conversion
Hey all!
I am looking for some more knowledge about a manual hub cinversion on my 2006 Access Cab Tundra. It's the 4.7L (2UZ-FE).
I've read as much as I can about these conversions at https://www.yotatech.com/forums/f116/add-manual-hub-conversion-help-198595/index3.html
I want to know how much of this is applicable to my rig as it has the electronic 4WD shifter buttons instead of a real shifter.
I was going to get the kit from ORS but obviously they are out of business.
So, in essence, what I am asking is what necessary components do I need to do a manual hub conversion on the truck other than the hub itself. What processes do I need to undergo to make the manual hub system work so that the CVs are only spinning in 4WD and that my 4WD works in High and Low gears when the hubs are locked.
thanks all!
I am looking for some more knowledge about a manual hub cinversion on my 2006 Access Cab Tundra. It's the 4.7L (2UZ-FE).
I've read as much as I can about these conversions at https://www.yotatech.com/forums/f116/add-manual-hub-conversion-help-198595/index3.html
I want to know how much of this is applicable to my rig as it has the electronic 4WD shifter buttons instead of a real shifter.
I was going to get the kit from ORS but obviously they are out of business.
So, in essence, what I am asking is what necessary components do I need to do a manual hub conversion on the truck other than the hub itself. What processes do I need to undergo to make the manual hub system work so that the CVs are only spinning in 4WD and that my 4WD works in High and Low gears when the hubs are locked.
thanks all!
