Notices
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section) Post your build-ups here

Hydrabyte' s 1996 4runner Build-Up Thread

Old 12-30-2013, 11:14 AM
  #1  
Registered User
Thread Starter
 
hydrabyte's Avatar
 
Join Date: Nov 2013
Location: Jacksonville, FL
Posts: 56
Received 11 Likes on 5 Posts
Hydrabyte' s 1996 4runner Build-Up Thread

Project 4runner has begun in North FL.
More importantly, THANKS to ALL of YOU for helping me get started.
1996 4runner, sat for 2.5 years in neighbors driveway, oil pump failure. Brought it back to life (referring to many tips here) and confirmed the motor was doa. Located a used 1998 3.4, a shop dropped it in and viola, now a running project.
Still fighting the dreaded P0773 but thanks to many people here I have a place to start troubleshooting. Very little mechanical experience but am learning.
Will add some pics later this week.
Old 12-30-2013, 05:32 PM
  #2  
Registered User
Thread Starter
 
hydrabyte's Avatar
 
Join Date: Nov 2013
Location: Jacksonville, FL
Posts: 56
Received 11 Likes on 5 Posts
First day Pic, what a mess


Not a big phone guy, shrunk Pic
Found the DOA Solenoid (P0773) CEL, replacing this weekend

1996, 2WD
Removed oem running boards
Installed 99 Tall Coils, front and rear,
KYB Gas a Shock (4)
Beck Arnley Lower Ball Joints
Finally, new 31x10.50x15, could of went to 32" but opted out.
Measurements before, ground to fender = 33" all 4 corners
Now at ~36" with tall coils, much better ride and handling!
Except for the front struts, did everything else myself, 1 long day. A lot of improvising, over-coming and adapting.
Lifted Pic, stock 225,75r.15's

Lifted with 31x10.5x15, not a daily driver so I went with Mesa Tires, buy 3 get one free deal .....

Last edited by hydrabyte; 01-20-2014 at 01:34 PM.
Old 12-30-2013, 07:08 PM
  #3  
Fossilized
Staff
iTrader: (6)
 
dropzone's Avatar
 
Join Date: Oct 2005
Location: PNW
Posts: 19,771
Received 448 Likes on 293 Posts
Awesome you are starting your build..
That pic is HUGE..I am on my phone, I could see the flag and front wheel
Old 01-06-2014, 05:49 AM
  #4  
Registered User
Thread Starter
 
hydrabyte's Avatar
 
Join Date: Nov 2013
Location: Jacksonville, FL
Posts: 56
Received 11 Likes on 5 Posts
P0773 resolved

Replaced all 3 instead of just the failed solenoid, CEL is gone, finally.
Replaced all 3 belts with new & removed running boards.
Next up, Bilsteins 5100's at 1.25" and some new rubber.
Old 01-06-2014, 07:20 AM
  #5  
Contributing Member
 
habanero's Avatar
 
Join Date: Sep 2005
Location: mo
Posts: 8,189
Received 463 Likes on 309 Posts
Woohoo! Another 96! Keep the pics and updates and pics coming!
Old 01-21-2014, 04:01 AM
  #6  
Registered User
Thread Starter
 
hydrabyte's Avatar
 
Join Date: Nov 2013
Location: Jacksonville, FL
Posts: 56
Received 11 Likes on 5 Posts
Edited & Updated

got her sitting and running smooth now
Old 02-02-2014, 05:35 AM
  #7  
Registered User
Thread Starter
 
hydrabyte's Avatar
 
Join Date: Nov 2013
Location: Jacksonville, FL
Posts: 56
Received 11 Likes on 5 Posts
Idle issue fixed
After cleaning throttle body, idle averaged 900+ and 1500+ in Park or Neutral.
Removed and Cleaned IAC but also needed to remove the 2 screws on the solenoid / magnet contraption, once removed ensure it can rotate freely and viola, idles normal...
Replaced gasket, Autozone = $1.49, ~2 hours of my time & carb cleaner, overall very cheap fix.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
icentropy
86-95 Trucks & 4Runners
22
09-16-2020 02:47 PM
toyotamonster
3.4 Swaps
7
04-16-2020 06:02 PM
jon.r
General Vehicle Related Topics (Non Year Related)
8
07-11-2015 03:34 PM
crashburnoveride
86-95 Trucks & 4Runners
1
07-10-2015 06:39 AM


Thread Tools
Search this Thread
Quick Reply: Hydrabyte' s 1996 4runner Build-Up Thread



All times are GMT -8. The time now is 12:03 PM.