Vibration after Clutch Replacement
#1
Registered User
Thread Starter
Join Date: Jan 2009
Location: Fredericton, NB, Canada
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Vibration after Clutch Replacement
I just replaced the clutch in my 4runner and when I press in on the clutch pedle in to put it into gear i have a slight vibration. this only happens in neutral and when i press out on the clutch to go into 1st. Im thinking this might have somethin too do with the thoughout bearing but not sure.
Just wondering if anyone may know what could be causing this.
Thanks!
Just wondering if anyone may know what could be causing this.
Thanks!
#3
Registered User
Thread Starter
Join Date: Jan 2009
Location: Fredericton, NB, Canada
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
well it has a light vibration with a wineding sound coming from the up around the clutch. With this it has a slight vibration in the gear shifter when the clutch is let off in 1st. it makes a sound that is alot like the sound when you cut your wheels with power strearing. It is just making this sound and light vibration while the clutch is being engaged in neutral and when it is let off in 1st gear.
I'm just wondering if i should drop the transmission and have another look at it again or if it might just be something minor.
Any Ideas?
Thanks,
I'm just wondering if i should drop the transmission and have another look at it again or if it might just be something minor.
Any Ideas?
Thanks,
#4
Registered User
Join Date: Jun 2008
Location: Valencia, CA
Posts: 386
Likes: 0
Received 0 Likes
on
0 Posts
If the noise & vibration happens when you press the clutch pedal, most likely it is the throwout bearing. Did you lightly grease the splines on the shaft when you replaced the disc? I would use something like High Temperature Brake Caliper Grease.
#6
vibrating clutch
can someone please help me? I just replace the clutch the flywheel and both the pilot bearing and throw out bearing I lightly grease the spline and now I have a light vibration when the clutches in gear
#7
vibrating clutch
can someone please help me? I just replace the clutch the flywheel and both the pilot bearing and throw out bearing I lightly grease the spline and now I have a light vibration when the clutches in gear?
Trending Topics
#8
Contributing Member
Andreas
Thread
Thread Starter
Forum
Replies
Last Post
GreatLakesGuy
The Classifieds GraveYard
8
09-04-2015 09:27 AM
TURBOrunnerNM
86-95 Trucks & 4Runners
4
07-22-2015 11:01 AM
change, clutch, coming, dull, motorcycle, replacemant, replacement, replacing, shifter, sound, truck, tundra, vibrates, vibrating, vibration