replacing drivers air bag?
#1
Registered User
Thread Starter
Join Date: Dec 2009
Location: slc utah
Posts: 646
Likes: 0
Received 0 Likes
on
0 Posts
replacing drivers air bag?
i bought a wrecked 1997 4runner and have been fixing it up and im wondering what sensor(s) needs to be replaced? and were is it located?
it was wrecked in this corner.
(sorry for the crappy cell pic)
it was wrecked in this corner.
(sorry for the crappy cell pic)
Last edited by 99 sas runner; 02-05-2011 at 08:17 AM.
#2
Contributing Member
So I guess you had the air bags blow, did the seat belts blow too? Were either of the sensors up front damaged at all?
The drivers side sensor on my 01 Tacoma looked like this:
I replaced it because the old one looked damaged. I also replaced the main air bag control box behind the center console, both air bags, and both seat belt retractors.
The drivers side sensor on my 01 Tacoma looked like this:
I replaced it because the old one looked damaged. I also replaced the main air bag control box behind the center console, both air bags, and both seat belt retractors.
Last edited by mt_goat; 02-05-2011 at 08:51 AM.
#3
Registered User
Thread Starter
Join Date: Dec 2009
Location: slc utah
Posts: 646
Likes: 0
Received 0 Likes
on
0 Posts
only the drivers bag went. im not sure if mine has the sensor there or not. ill definitely look also, i have the sensors off of a 98 so idk if they will work or not
Trending Topics
#9
Registered User
do the 3rd gens not have passenger airbags? i figured if one airbag blew...then the other one should blow too right?
that's how it was in my wreck? lol and all other wrecks i've seen no matter what happened.
should just replace anything that doesn't work? there should only be two sensors up front....so check em, and replace if needed? (if you can check them, which i'm sure you can.)
Off Topic, how bad was the wreck?
that's how it was in my wreck? lol and all other wrecks i've seen no matter what happened.
should just replace anything that doesn't work? there should only be two sensors up front....so check em, and replace if needed? (if you can check them, which i'm sure you can.)
Off Topic, how bad was the wreck?
#10
Registered User
Thread Starter
Join Date: Dec 2009
Location: slc utah
Posts: 646
Likes: 0
Received 0 Likes
on
0 Posts
do the 3rd gens not have passenger airbags? i figured if one airbag blew...then the other one should blow too right?
that's how it was in my wreck? lol and all other wrecks i've seen no matter what happened.
should just replace anything that doesn't work? there should only be two sensors up front....so check em, and replace if needed? (if you can check them, which i'm sure you can.)
Off Topic, how bad was the wreck?
that's how it was in my wreck? lol and all other wrecks i've seen no matter what happened.
should just replace anything that doesn't work? there should only be two sensors up front....so check em, and replace if needed? (if you can check them, which i'm sure you can.)
Off Topic, how bad was the wreck?
#11
Contributing Member
Not sure if there is a way to check the crash sensors, mine (2001 Taco) was slightly damaged (in the crumple zone) so I replaced it. Afterward I cut it open to look at it and it looked like it was still operable. It was a simple inertia switch, heavily protected. Probably would have still worked. I didn't replace the other crash sensor and it was fine (no codes thrown).
I read in my research that the main airbag computer should be replaced anytime the bag blows, but I don't know how accurate the info was. I found a bone yard that had everything but the crash sensors for sale so I bought and replaced everything I mentioned in my first post.
I read in my research that the main airbag computer should be replaced anytime the bag blows, but I don't know how accurate the info was. I found a bone yard that had everything but the crash sensors for sale so I bought and replaced everything I mentioned in my first post.
Last edited by mt_goat; 02-14-2011 at 09:29 AM.
#12
Registered User
I took a look in my FSM. It is not crystal clear, but it appears to require that in any deployment on either side, that both front sensors, the airbag sensor assembly (the box in the center console) and the airbag assembly and the seatbelt pre-tensioner that deployed be replaced. There is another squib in the belt mechanism that should have fired so this last makes sense. I can't imagine that it did not fire if the bag on that side deployed.
I saw nothing about an airbag computer, unless that is the same as the airbag sensor assembly in the center console.
And yeah, they want you to buy new--used sensors, etc. is a no-no. I have no experience with this, I'm just reading what Toyota says in the FSM.
I saw nothing about an airbag computer, unless that is the same as the airbag sensor assembly in the center console.
And yeah, they want you to buy new--used sensors, etc. is a no-no. I have no experience with this, I'm just reading what Toyota says in the FSM.
Last edited by TheDurk; 02-14-2011 at 11:19 AM.
#13
Contributing Member
http://www.ncttora.com/fsm/1996/SIL/...rsair/oper.pdf
6. AIRBAG SENSOR ASSEMBLY
The airbag sensor assembly is mounted on the floor inside the
center cluster. The airbag sensor assembly consists of airbag
sensor, safing sensor, diagnosis circuit, ignition control and
drive circuit, etc.
It receives signals from the airbag sensor assembly and judges
whether the SRS must be activated or not.
The airbag sensor assembly is mounted on the floor inside the
center cluster. The airbag sensor assembly consists of airbag
sensor, safing sensor, diagnosis circuit, ignition control and
drive circuit, etc.
It receives signals from the airbag sensor assembly and judges
whether the SRS must be activated or not.
Last edited by mt_goat; 02-14-2011 at 11:56 AM.
#15
Contributing Member
I found what I needed here: http://www.car-part.com/
#17
Contributing Member
You still haven't found those crash sensors? I don't know what they meant by members. They are inside the inter fender above the frame. Only thing under the hood with a huge yellow wiring harness.
Last edited by mt_goat; 02-18-2011 at 05:41 AM.
#18
Registered User
Thread Starter
Join Date: Dec 2009
Location: slc utah
Posts: 646
Likes: 0
Received 0 Likes
on
0 Posts
#19
Thread
Thread Starter
Forum
Replies
Last Post
Avenged
95.5-2004 Tacomas & 96-2002 4Runners
4
07-09-2015 07:55 AM
skoti89
Offroad Tech
3
07-08-2015 12:05 AM
FS[SouthEast]: 1st Gen 4Runner Slider Window, Driver Side
coryc85
Misc Stuff (Vehicle Related)
0
07-06-2015 04:07 AM