rear links.... axle placement
#1
Registered User
Thread Starter
Join Date: Jul 2003
Location: Race City USA (Mooresville, NC - LKN)
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
rear links.... axle placement
i have a question on axle placement......
i am running 38x15.50's, OME 860's, 2.5" panhard drop, and stock upper and lower links on a 94 4runner
when the truck is sitting level the tires look way too close to the front side of the wheelwells and look like they will rub like crazy, but when i drive or flex they rub on the rear bumper. i removed the bumper and the tires fit perfectly in the wheelwells with alittle rubbing at full flex.
if i extend the lower links and center the tires like i want to, it seems that the tires will rub and it will not be able to flex at all. or will extending both links fit this. i do have new heim upper links waiting install
i am running 38x15.50's, OME 860's, 2.5" panhard drop, and stock upper and lower links on a 94 4runner
when the truck is sitting level the tires look way too close to the front side of the wheelwells and look like they will rub like crazy, but when i drive or flex they rub on the rear bumper. i removed the bumper and the tires fit perfectly in the wheelwells with alittle rubbing at full flex.
if i extend the lower links and center the tires like i want to, it seems that the tires will rub and it will not be able to flex at all. or will extending both links fit this. i do have new heim upper links waiting install
Thread
Thread Starter
Forum
Replies
Last Post
Flying91
86-95 Trucks & 4Runners (Build-Up Section)
45
04-11-2024 04:39 PM
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM
FS[GreatLakes]: Toyota collection part out
88sasturbotoy
Axles - Suspensions - Tires - Wheels
2
08-11-2015 01:56 AM