rondo221

Well I can prolly say that phase one of my mods for my 4Runner is done..
heres what Ive done
Phase 1
- New Wheels Michelins x radial LT 10/03
- Hood w/ Scoop 11/03
- Mag Lite Mod 2/04
- Rear Diff Mod 3/04
- Removed Step boards 3/04
I tried to go 1/2 and 1/2 on my mods for performance increase and asthectics I think I was pretty even..

Heres what Im thinking for Phase 2
- WAAG Grill Gaurd- purchased/getting it at Anza Borrego Jam
- New Antenna... Taco whip or a euro stubby thing for 20 bucks. I usually dont listen to the radio, but I hate having the antenna 1/2 way sticking up!!
- 39" X 59" RACK MATE Conferr Roof Rack
- 2" Suspension Mod _Cornfed spacers? maybe?
Im gonna ask a question on lifts on another post
- Sliders No idea what kind yet.. Seems like, a lot of ppl making these have gone outta business.

Phase 3
Still up in the air.
heres some pics

MTL_4runner

Do the deckplate and get an amsoil air filter.....you can thank me after you do it.

rondo221

Whoops forgot the most important thing..
BIG Thanks to Bob at 4Runners .org for the great writeup on the R Diff Mod.. made it clear, concise and easy. Im sure to go back and read up on more mods that I can do..
R Diff Mod

rondo221

Ohh forgot about the Amsoil Air Filter!! Im kinda on the fence about the Deckplate mod.. lotta ppl have done it I know. Im still kinda nervous about cutting my airbox.. esp since I still got payments on this thing. hehe If I could find a spare Airbox.. then I'd be all over it.. but my one and only I really dont want to fark it up!! :chicken: :chicken: :chicken:

Mossback74

Its pretty hard to mess it up. You would have to cut a reallly big hole, and even if you did you could try a 5" deckplate. A 4" hole saw makes it fool proof. The PITA part is cleaning up the hole and getting all the shavings out.

You can do it! (all night long)

Bob_98SR5

rondo,

The deckplate mod is pretty benign. a hole saw is best but you can use a cutout tool like a rotozip or a dremel w/ a cutout bit. however, you'll have to hold that cutout tool really hard b/c when it hits the waffle/ribs inside, the tool will skip and jump out of your hand.

bob

Birdman

Not too hard. I just gave it a nice warm bath with some dawn and blew it dry with compressed air then towled it off.

Tacoma Dude

Bob, I'm surprised you didn't suggest the elbow mod!