Reading TRD Gauge
#1
Registered User
Thread Starter
Join Date: Jul 2003
Location: Cheyenne, Wyoming
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
Reading TRD Gauge
I installed the TRD boost gauge yesterday along with oil pressure and Volt meter. I have a question for those who have the Boost gauge. What does your read when at idle and while driving. My needle is on the vacuum side about 5 - 15 depending on RPM. I did get it to go to about 3 PSI pressure once so far. So what does your read?
#4
thats probably about right for a 4runner s/c....My WRX ran around 15 psi of boost....i heard people are pushing Evo8's on stock internal into the mid 20's dunno how factual that is though
#5
Registered User
Thread Starter
Join Date: Jul 2003
Location: Cheyenne, Wyoming
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the replies and on my 4runner's comment - thanks. Sounds like yours are the same as mine. I was thinking it would go to Pressure when under throttle. I went with an Auto Meter Carbon Fiber gauge and the Lo Tek pods. It came out really nice.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
Toyvana
General Vehicle Related Topics (Non Year Related)
1
07-29-2015 10:47 PM
Poncho0206
95.5-2004 Tacomas & 96-2002 4Runners
3
07-10-2015 06:21 PM