Quick help with 3vz reinstall - Battery Cable placement
08-05-2005, 06:58 PM
#1
Registered User
Thread Starter
Join Date: Feb 2005
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Quick help with 3vz reinstall - Battery Cable placement
I am reinstalling my 3.0 and wasn't a hundred percent sure where the connection in the picture is supposed to go? I thought just to be safe I would post for some one to help me out! It is on the cable that runs from the battery to the starter solenoid. Thanks for any help! 
Got my FPT working again so I could upload a better picture...
http://www.users.qwest.net/~braverex...artercable.JPG
Got my FPT working again so I could upload a better picture...
http://www.users.qwest.net/~braverex...artercable.JPG
Last edited by braverex; 08-06-2005 at 11:30 AM.
08-05-2005, 07:35 PM
#4
Registered User
Thread Starter
Join Date: Feb 2005
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Silver_Truck
looks like the one that grounds at the nut right behind it.
Trending Topics
08-06-2005, 12:15 PM
#8
Contributing Member
Join Date: Oct 2004
Location: B'ham, WA
Posts: 1,817
Likes: 0
Received 0 Likes
on
0 Posts
ooh ooh I got it, it grounds to the front of the block on the pass side just above the oil pan. right next to some bracket thingy that coomes down from above (didn't see what it connected to)
Thread
Thread Starter
Forum
Replies
Last Post
jasonty
Pre 84 Trucks (Build-Up Section)
41
12-23-2018 01:00 PM
Peevedkitten
86-95 Trucks & 4Runners (Build-Up Section)
11
08-31-2015 06:57 PM
