Pinion Flange Orientation Question
03-14-2005, 08:48 AM
#1
Contributing Member
Thread Starter
Join Date: Jun 2003
Location: Bethlehem, GA
Posts: 1,067
Likes: 0
Received 0 Likes
on
0 Posts
Pinion Flange Orientation Question
Can anyone tell me where to look for the marks on the pinion flange to line it up correctly with the differental flange. I've searched but came up empty. Anyone have any pictures of this or possibly the FSM that describes it? Thanks guys.
99 2wd 4runner.
99 2wd 4runner.
03-14-2005, 10:30 AM
#2
No alignment is usually needed. If you are worried about it, paint a mark on the flange and diff. and call it good. All that needs to be done is ensure the driveshaft itself is properly phased:
http://www.4crawler.com/4x4/CheapTri....shtml#Phasing
http://www.4crawler.com/4x4/CheapTri....shtml#Phasing
Thread
Thread Starter
Forum
Replies
Last Post
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
15
07-14-2020 08:35 PM
Jcrawl94
84-85 Trucks & 4Runners (Build-Up Section)
10
10-24-2015 04:34 PM
TJWilly
95.5-2004 Tacomas & 96-2002 4Runners
6
07-31-2015 02:05 PM
kirkrunner
86-95 Trucks & 4Runners
2
07-27-2015 07:59 PM
