ISR Install and ?
#1
Registered User
Thread Starter
Join Date: Oct 2004
Location: Michigan
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
ISR Install and ?
I removed the ISR and installed a Stainless pipe, but my question is did I put the hose that ran to the ISR to the rite place? I had nothing to tee so I just looped it to the intake nipple. See pic
ISR Pics
I also have an extra piece of .065 wall stainless tube I'll sell. It's cut to 5.625 long and expanded to 2.5 ID all you need to do the mod.
Thanx
ISR Pics
I also have an extra piece of .065 wall stainless tube I'll sell. It's cut to 5.625 long and expanded to 2.5 ID all you need to do the mod.
Thanx
Last edited by 88XtraCabDLX; 04-15-2006 at 02:50 PM.
#4
Registered User
Where in the world can I find stainless pipe for the ISR? I had a piece done up at a muffler shop but all the shops in my area only have aluminized. I'd much prefer it stainless for looks and piece of mind.
#6
Registered User
Join Date: Jan 2006
Location: Allen, Tx / Rexburg, ID
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
http://www.sfxperformance.com/parts/MAG10736.htm
#7
Registered User
I did the isr mod a couple of weeks ago and this is where i got it from
http://www.sfxperformance.com/parts/MAG10736.htm
http://www.sfxperformance.com/parts/MAG10736.htm
Is this polished?
Thread
Thread Starter
Forum
Replies
Last Post
punks_is_4x4
86-95 Trucks & 4Runners
10
08-21-2015 01:35 PM
Esibnitsud
86-95 Trucks & 4Runners
0
07-30-2015 08:19 PM