front daystar spacer from wheelers
#1
Registered User
Thread Starter
Join Date: Feb 2006
Location: Allen, Tx/Stillwater, Ok
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
front daystar spacer from wheelers
hey all
i'm doing some research on how i am to make my front end level with the rear after i put in the LC springs that are 19" and 19.5"
i'm putting TRD tundra springs in the front, and i'm a 2wd so i dont need to worry about my cv's
so, wheelers sells a 1.25" daystar front spacer that comes with the longer studs for like $69 + shipping.
my question is, does anybody actually have this spacer? because i noticed that any other website selling front spacers for 4runners only offer them in 1" and 1.5", and if you check the daystar website, it does not list a front 1.25" spacer.
i already talked to wheelers and they said they'd email me when they found out and i havent got that back (that was like a week or so ago).
so does anybody know what the real height of that spacer that they sell?
thanks
Mark
i'm doing some research on how i am to make my front end level with the rear after i put in the LC springs that are 19" and 19.5"
i'm putting TRD tundra springs in the front, and i'm a 2wd so i dont need to worry about my cv's
so, wheelers sells a 1.25" daystar front spacer that comes with the longer studs for like $69 + shipping.
my question is, does anybody actually have this spacer? because i noticed that any other website selling front spacers for 4runners only offer them in 1" and 1.5", and if you check the daystar website, it does not list a front 1.25" spacer.
i already talked to wheelers and they said they'd email me when they found out and i havent got that back (that was like a week or so ago).
so does anybody know what the real height of that spacer that they sell?
thanks
Mark
#3
Contributing Member
I had those from wheelers. They were 1" thick, but, gave a little more lift than that because it preloaded the coil rather than sat on top of the pack.
I had no problems with them with levling out the front. Any larger and you'd have a really stiff ride. Go for it.
I had no problems with them with levling out the front. Any larger and you'd have a really stiff ride. Go for it.
Thread
Thread Starter
Forum
Replies
Last Post
GreatLakesGuy
The Classifieds GraveYard
8
09-04-2015 09:27 AM
coffey50
Offroad Tech
17
07-28-2015 10:55 AM
terminator
Misc Stuff (Vehicle Related)
3
07-27-2015 07:13 PM