warpigg

my control arm bushings are shot on my 4unner and i cant get it aligned because of it so will the day star tacoma bushing kit http://daystarweb.com/productdetail.php?productID=494 fit in on my 4runner along with the tacoma rack and pinnion, and sway bar bushings?

thanks for the help

scuba

Everything in the front end is the same on a 4Runner and a Tacoma.
So, yes, they'll fit.

However, it is a major pain in the ass to press out and press in the control arm bushings. I would recommend just getting lower mileage LCA's from a junk yard or just going brand new from a dealer.

warpigg

my dads a master tech for toyotas and theres a press at his work so i dont think it would be that bad. and in vermont junkyards low milage stuff is usally above 150000 miles and is rusted unfortunatly, so that makes the realy good stuff cost alot like $100-250 for a control arm.

cpizzle42

I disagree with the Scuba on this one. I bought oem bushings and did the press work myself with the stock bottle jack, a socket, and an arbor press. All the threads on this site about replacing LCA bushings make it seem way harder then it is.

warpigg

would any one happen to know how much these would cost from your local parts store?

cpizzle42

I got prices from here. http://www.toyotapartsales.com/partl...&siteid=214074
Printed the prices out and took them to the dealership to buy them. They matched the prices.