blue lights again...
#1
Registered User
Thread Starter
Join Date: Oct 2003
Location: Tampa, FL
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
blue lights again...
Has anyone done a conversion to blue lights on a second gen 4Runner? I've been watching all the progress since the whole craze started, but it looks like most of the input is coming from people with 3rd gens. Any 2nd gen'ers out there with pictures? Is there anything worth noting that's different on our 4runners than on those of the 3rd generations?
-Keith
-Keith
#4
Contributing Member
Join Date: May 2002
Location: Solano Co, CA Originally a North Idaho Hick
Posts: 4,267
Likes: 0
Received 0 Likes
on
0 Posts
I've done my whole interior in blue.. here's a thread for ya.....
Potatoe paint
Don't have any pics of the completed project but it looks sweet!! I did all my lights including my cig lighter light odometer backlights, speedo and tach needles, and glove box. Good luck
Potatoe paint
Don't have any pics of the completed project but it looks sweet!! I did all my lights including my cig lighter light odometer backlights, speedo and tach needles, and glove box. Good luck
Last edited by UKMyers; 02-28-2004 at 06:22 PM.
#5
Registered User
Thread Starter
Join Date: Oct 2003
Location: Tampa, FL
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
Hey UKMyers,
I started converting all my bulbs to blue this afternoon. I did the ash tray, cigarette lighter, glove box, and the buttons on the console. I found some blue glass paint at a crafts store in town and so far it's working pretty good. I'm planning on doing the insturment panel and the in dash lights tomorrow.
I do have one quick question though... how in the hell do I get the rear window switch apart to sand off the green tint? It looked like there were four little tabs on the side, but they don't push in, so it's got to be something else. I've spent more time looking at how to get this apart than I spent doing anything else.
Thanks,
Keith
I started converting all my bulbs to blue this afternoon. I did the ash tray, cigarette lighter, glove box, and the buttons on the console. I found some blue glass paint at a crafts store in town and so far it's working pretty good. I'm planning on doing the insturment panel and the in dash lights tomorrow.
I do have one quick question though... how in the hell do I get the rear window switch apart to sand off the green tint? It looked like there were four little tabs on the side, but they don't push in, so it's got to be something else. I've spent more time looking at how to get this apart than I spent doing anything else.
Thanks,
Keith
Thread
Thread Starter
Forum
Replies
Last Post
ashersullivan88yota
86-95 Trucks & 4Runners
24
01-18-2022 05:37 PM
FS[PacNorWest]: Toyota Inclinometer/Altimeter
AkitaDog
Misc Stuff (Vehicle Related)
12
09-01-2015 08:05 AM
PopsDad1
General Electrical & Lighting Related Topics
0
07-30-2015 02:21 PM
Odin
86-95 Trucks & 4Runners
8
07-15-2015 09:28 PM