TRunner

Where can I get some cheap?

runningman

A wrecker...? just clean 'em up well and lube them, that is your best bet, i threw some paint on 'em and they look awesome.

TRunner

What vehicle do they come off of?

CTB

Any IFS Toyota 4Runner or truck

Cebby

Any 86 - 95 IFS truck as CTB said. Later Tacomas had them too, but I'm pretty sure those will not fit.

alabamatoy

They arent all the same. They are also on Solid axle toys and samauris and a few other brands.

CTB

Ya, those also have them, but you can't use them. They have different axle spline counts. Solid Axle Toyota's have 30 spline axles (I believe), while the IFS stuff has 26 spline axles. He needs to find manual hubs off of an IFS rig.

nofilter

try toyota_parts_dude. or yotayard.com

toyota parts dude

iTrader: (2)

i have a set of the aisin hubs you need i'll sell them for $50 + shipping. they work perfect they are just a little weathered. they were from a really rusted 87 4runner i found at a local salvage yard. the hubs on those 4x4 vans toyota sold in the mid 80's will work also. they are exactly the same as a ifs truck.

Blair

Hey Jason,
I need you to keep an eye out for a good set for me. I gotta replace my '91, cause I rolled it and everything I see up here is all ADD, no locking hubs. I MIGHT be able to buy mine back from the ins. company, but otherwise I'm gonna be hitting you up again. Please keep me in mind. I'd buy the ones you got now, but I haven't bought a new truck yet, and I don't want to hang you up...just keep me in mind, thanks,
blair

toyota parts dude

iTrader: (2)

Blair why don't you just put your ADD plates back on before they take the 4runner. then you will have the hubs for your new 4 runner.

Blair

Thinking about that, AND the axles you sold me
I'll probably buy the whole thing, if they don't fix it!