Notices
95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

87 4runner

Thread Tools
 
Search this Thread
 
Old 10-01-2005, 12:45 AM
  #1  
Registered User
Thread Starter
 
ilandcruza's Avatar
 
Join Date: Jul 2005
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
buying an 87 4runner ?

i might be picking up an 87 4runner v6 4x4 5spd. anyone have some advice on what to look for like parts that usually go bad or anything i might need to know about it. any suggestions welcome. thanks

Last edited by ilandcruza; 10-01-2005 at 10:15 AM.
Old 10-01-2005, 03:07 AM
  #2  
Registered User
 
Adam F's Avatar
 
Join Date: May 2002
Location: Cincinnati Ohio
Posts: 2,479
Likes: 0
Received 2 Likes on 2 Posts
Mainly, check for rust in the frame by poking it with a screwdriver. Toyota frames rust from the inside out. Most problematic area is the rear section.

There is no parts that "usually" go bad. Toyotas are one of the most reliables vehicles on the planet, especially trucks.

There are normal wear and tear maintenence items such as tie rods, ball joints, brakes, shocks, alternator, starter, that kind of stuff.

The V6 engine was available in 1988, not 87, so either its an 88 V6 or an 87 4cy.

Last edited by Adam F; 10-01-2005 at 03:09 AM.
Old 10-01-2005, 08:06 AM
  #3  
Registered User
Thread Starter
 
ilandcruza's Avatar
 
Join Date: Jul 2005
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
right on. i guess ill check on the engine when i go take a look at the truck. i rather have the 4cyl motor. thanks for the info.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Flying91
86-95 Trucks & 4Runners (Build-Up Section)
45
04-11-2024 04:39 PM
icentropy
86-95 Trucks & 4Runners
22
09-16-2020 02:47 PM
BeMiceElf
Misc Stuff (Vehicle Related)
7
10-10-2015 09:40 PM
Poppie51
86-95 Trucks & 4Runners
8
07-23-2015 05:03 PM
Poppie51
Newbie Tech Section
0
07-16-2015 06:16 PM



Quick Reply: 87 4runner



All times are GMT -8. The time now is 10:51 PM.