3rd gen auto for manual swap?
#1
Registered User
Thread Starter
Join Date: Jan 2003
Location: san diego
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
3rd gen auto for manual swap?
has anyone here completed this? i can get a manual + T-case for less than $500, and would love to have a 5 speed (or is anyone interested in a trade???).
does anyone know whether the drive shafts are the same length? what is needed in addition to the tranny and t-case (i.e. clutch, brackets, etc.)? i've pulled the tranny out of the 3.4 before, so i think i could manage a swap if there aren't too many intricacies or fabrication involved . . . . any help or insight would be appreciated!
creed
does anyone know whether the drive shafts are the same length? what is needed in addition to the tranny and t-case (i.e. clutch, brackets, etc.)? i've pulled the tranny out of the 3.4 before, so i think i could manage a swap if there aren't too many intricacies or fabrication involved . . . . any help or insight would be appreciated!
creed
#2
Contributing Member
Join Date: Oct 2002
Location: Fountain Valley, CA (so cali)
Posts: 1,997
Likes: 0
Received 0 Likes
on
0 Posts
i believe the whole computer controls the auto tranny, so youd need a new computer unit
thats what i think anyway.. as my truck says right on the computer "3vz3 4x2 automatic"
thats what i think anyway.. as my truck says right on the computer "3vz3 4x2 automatic"
#3
Email Eric at eric@nw4runner.com
He's the only one I know who has done the swap on a 3rd gen. 4Runner. Do you have a multimode 4wd transfer case? If could you take some pics of it if you do?
He's the only one I know who has done the swap on a 3rd gen. 4Runner. Do you have a multimode 4wd transfer case? If could you take some pics of it if you do?
#5
Registered User
Thread Starter
Join Date: Jan 2003
Location: san diego
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the info, guys!
i was wondering about the ECU - i was hoping that going from an auto to manual didn't necessitate an ECU swap, because the ECU would still be able to figure out the fuel and timing at a particular gear based on the engine signals, but didn't need to have any input into shifting. now the other way around, maunal to auto, i would think you needed an ECU to have control over shifting. i'll email the guru above and see what they think.
cyclinder, pedal, trim . . . got it - that's what i was looking for!
thanks,
creed
i was wondering about the ECU - i was hoping that going from an auto to manual didn't necessitate an ECU swap, because the ECU would still be able to figure out the fuel and timing at a particular gear based on the engine signals, but didn't need to have any input into shifting. now the other way around, maunal to auto, i would think you needed an ECU to have control over shifting. i'll email the guru above and see what they think.
cyclinder, pedal, trim . . . got it - that's what i was looking for!
thanks,
creed
#6
Contributing Member
Join Date: Jul 2002
Location: SLC, UT
Posts: 5,862
Likes: 0
Received 0 Likes
on
0 Posts
Back when I had a 93 Camry V6, I was thinking of doing an auto to manual swap. There are a few guys on toyota nation that have done this. The car runs fine without changing the ECU, but they always have a check engine light on.
#7
Registered User
Thread Starter
Join Date: Jan 2003
Location: san diego
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Macgyver
Email Eric at eric@nw4runner.com
He's the only one I know who has done the swap on a 3rd gen. 4Runner. Do you have a multimode 4wd transfer case? If could you take some pics of it if you do?
Email Eric at eric@nw4runner.com
He's the only one I know who has done the swap on a 3rd gen. 4Runner. Do you have a multimode 4wd transfer case? If could you take some pics of it if you do?
i have the stickshift-style (manual) transfer case that's standard on the SR5, with 4hi and 4lo - is this what you mean?
creed
Trending Topics
#8
Not to shoot down your idea, but this would not be worth it. You would be much better off selling your auto and finding a manual.
The time and money would never be worth it going into this project.
The time and money would never be worth it going into this project.
#9
Registered User
Thread Starter
Join Date: Jan 2003
Location: san diego
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by <96 Runner>
Not to shoot down your idea, but this would not be worth it. You would be much better off selling your auto and finding a manual.
The time and money would never be worth it going into this project.
Not to shoot down your idea, but this would not be worth it. You would be much better off selling your auto and finding a manual.
The time and money would never be worth it going into this project.
creed
#10
Registered User
Join Date: Dec 2007
Location: Rochester, Washington
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
Bump an old, old thread to see if anyone else has carried this out, specifically on a 01 or 02' 4Runner as, they didn't come with a manual. The only way I could justify doing it is buying a whole donor vehicle.
Anyone do this, think about it?
Anyone do this, think about it?
Last edited by raydouble; 03-15-2009 at 04:37 PM.
#11
just get everything you need trans/tcase, clutch, master cylinder, pedal assembly.
all you have to do is wire it up so your ecu always thinks your truck is in neutral.
all you have to do is wire it up so your ecu always thinks your truck is in neutral.
#13
Registered User
Join Date: Feb 2008
Location: central okla / so-cal
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
bump an old thread
im trying to do the opposite and have a post nobody is responding too :https://www.yotatech.com/forums/f161...8-t100-208985/
ive got a 98 t100 4x4 m/t i want to put an auto in (my tranny is going out, bad) ive found a 97 4runner 4x4 auto donor vehicle im pulling the tranny out of. i pulled the computer out today, part #89661-3D320, will this computer work? what do i need to do to the wiring harness, does the ecu need to be flashed? any help would be greatly appreciated!
patrick
im trying to do the opposite and have a post nobody is responding too :https://www.yotatech.com/forums/f161...8-t100-208985/
ive got a 98 t100 4x4 m/t i want to put an auto in (my tranny is going out, bad) ive found a 97 4runner 4x4 auto donor vehicle im pulling the tranny out of. i pulled the computer out today, part #89661-3D320, will this computer work? what do i need to do to the wiring harness, does the ecu need to be flashed? any help would be greatly appreciated!
patrick
#14
t100 Hi I have a good at with transfercase and ecm and harness that I'm looking to tr
Hi I have a good at with transfercase and ecm and harness that I'm looking to trade for a Mt transfer case mine is out of a 96 t100 so everything you need if interested please contact me at 916 367 2121 QUOTE=sprchrgd98t100;51419377]bump an old thread
Hi I have a good at with transfercase and ecm and harness that I'm looking to trade for a Mt transfer case mine is out of a 96 t100 so everything you need if interested please contact me at 916 367 2121
im trying to do the opposite and have a post nobody is responding too :https://www.yotatech.com/forums/f161...8-t100-208985/
ive got a 98 t100 4x4 m/t i want to put an auto in (my tranny is going out, bad) ive found a 97 4runner 4x4 auto donor vehicle im pulling the tranny out of. i pulled the computer out today, part #89661-3D320, will this computer work? what do i need to do to the wiring harness, does the ecu need to be flashed? any help would be greatly appreciated!
patrick[/QUOTE]
Hi I have a good at with transfercase and ecm and harness that I'm looking to trade for a Mt transfer case mine is out of a 96 t100 so everything you need if interested please contact me at 916 367 2121
im trying to do the opposite and have a post nobody is responding too :https://www.yotatech.com/forums/f161...8-t100-208985/
ive got a 98 t100 4x4 m/t i want to put an auto in (my tranny is going out, bad) ive found a 97 4runner 4x4 auto donor vehicle im pulling the tranny out of. i pulled the computer out today, part #89661-3D320, will this computer work? what do i need to do to the wiring harness, does the ecu need to be flashed? any help would be greatly appreciated!
patrick[/QUOTE]
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
FS[PacSouthWest]: 2- 8"3rd members:4.88 ratchet lockers,new setup kit, rear axle rebuild kit,diff armor
jerusry
Axles - Suspensions - Tires - Wheels
1
10-19-2015 05:28 PM